Wheels MFG T47 OUT BB > 29mm DUB Black
Description
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer
Bearings: Enduro ABEC-3
Bottom Bracket Shell Width (mm): 68mm - 100mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 29mm
Tool Pattern: 48.5mm x 16-notch
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKBB-108-FN0108
Chris King CERAMIC Road Bottom Bracket Shim/Xtype/FSA (use mtb BB for FSA road Lite cranks ) 24mm spindle
The construction and compatibility of this Chris King® Ceramic Bearing Bottom Bracket are identical to the Chris King® stainless steel bearing bottom bracket. However, this bottom bracket uses ceramic balls, which are lighter, harder and have greater roundness than stainless steel balls, resulting in a bearing with less friction and exceptional speed and strength.
These factors along with Chris King's sealing system mean you need only use a very small amount of low-viscosity lube in the bearing. This means less drag in the bearing, allowing you to pedal with greater efficiency.
•Designed for Shimano™-compatible external type crank systems including Shimano™ Hollowtech II™, Race Face X-Type™, and FSA MegaExo™
•24 ball bearings per side
• Fully user-serviceable bearings$357.12 (RRP) -
Stock Code:CKBB-ADB2Stock Code:CKBB-ADS1Stock Code:CKBB-ADB1Stock Code:CKBB-ADM2Stock Code:CKBB-ADP1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 24x fits 68mm and 73mm shell widths with 24mm spindles.
It’s a silky smooth, long-lasting bottom bracket built around King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:BBBB-GXPALT-B3$47.43 (RRP)
Add To Cart
-
Stock Code:TGBB-TGLN392273-122
Tange-Seiki LN 3922 JIS cartridge bottom bracket features ultra-smooth sealed cartridge bearings, solid boron steel spindle and steel cups.
- 73mm English-threaded (1.370" x 24 tpi)
- JIS square taper
- steel cups & sleeve
- requires Park Tool BBT-22 for installation & removal
- crank arm bolts are not included$49.00 (RRP)Add To Cart
-
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABM2Stock Code:CKBB-ABT2Stock Code:CKBB-ABBFStock Code:CKBB-ABP1Stock Code:CKBB-ABZ2Stock Code:CKBB-ABG2Stock Code:CKBB-ABB2
** FIT KIT REQUIRED FOR USE **
ThreadFit 30 comes with a Center Sleeve for 73mm BB shell. For 68mm shell - sleeve is required(included in Fit Kit #2 for DUB Road cranks).
ThreadFit 30 bottom bracket is silky smooth and long-lasting thanks to legendary, angular-contact bearings. They actually get faster over time as their contact surfaces wear, because they are build to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$399.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)
