Wheels MFG 30mm ID 5mm Spindle Spacer
Description
Used to adjust crank chainline or take up any slack when using 30mm spindle cranks.
Inner Diameter: 30mm
Outer Diameter: 41.5mm
Thickness: 5mm
Sold Individually
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-T47-OUT-29MM
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer
Bearings: Enduro ABEC-3
Bottom Bracket Shell Width (mm): 68mm - 100mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 29mm
Tool Pattern: 48.5mm x 16-notch$273.00 (RRP) -
Stock Code:WMBB-386EVOBB-SHIM
Threaded BB for 386EVO frames and 24mm diameter spindle cranks. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
Bottom Bracket/Frame Interface: BB386EVO, BB392EVO
Bottom Bracket Shell Width (mm): 86.5mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 24mm
Bearings: Enduro ABEC-3$241.50 (RRP)Add To Cart
-
Stock Code:BTBB-4055822522106
Seido T47 BBs are machined to precision with the highest quality aluminium and bearings. They will fit 30mm spindle cranks with the included washers, or can be fitted with our adaptor kits to accept other sizes as well.
The internal provides room for internal cable routing. Servicing or replacing bearings is an easy job thanks to a great accessibilty of the bearing races, even when still fitted inside the frame. Outer seals provide extra protection for the already double-sealed bearings.
Uses 2x 6808 bearings (30x40x7mm, ID x OD x t).
SUITABLE BB SHELL WIDTH
86.5mm - 92mm
Includes 2 x 1.5 mm, 4 x 1 mm, 1x wave washer Removable Nylon Sleeve Adaptable to 24 and 24 / 22 mm with our spindle adapters$120.00 (RRP)Add To Cart
-
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABY1Stock Code:CKBB-ABM2Stock Code:CKBB-ABZ1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ 30 fits 30mm spindle cranks in 68mm BB shells and SRAM DUB cranks.
Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationExpected Date:06 June 2024$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP) -
Stock Code:BBBB-46-68/73-30-B5
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.$115.94 (RRP)Add To Cart
