Wheels MFG T47 A/C BB Shimano Black
Description
T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-PF30-CAMP
A new solution for adapting Campagnolo Ultra-Torque cranks to Pressfit 30-standard frames
This adapter fits over the installed crank bearing so no bearing removal is required for installation
Simply tap the cranks with mounted adapters into the 6806 bearing in the Pressfit 30 BB. Note: Note: The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Tighten cranks to Campagnolo specifications.
Not compatibale with 386EVO and BBRight frames$89.95 (RRP)Add To Cart
-
Stock Code:WMBB-BB30-30-5MMStock Code:WMBB-BB30-30-10MM
Used to adjust crank chainline or take up any slack when using 30mm spindle cranks.
Inner Diameter: 30mm
Outer Diameter: 41.5mm
Thickness: 10mm
Sold Individually$13.00 (RRP)$17.00 (RRP) -
Stock Code:WMBB-BBRIGHT-OUT-30
Thread together bottom bracket for frames using the BBRight™ bottom bracket standard and BB386 30mm spindle diameter cranks. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Note: Spindle length must be equivalent to a BB386 length*
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: BBRight™ Press Fit
Bottom Bracket Shell Width: 79mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 30mm
Tool Pattern: 48.5mm x 16 notch
Over Bearing Width: 91.5mm in 79mm wide shell*$216.00 (RRP) -
Stock Code:WMBB-BB-BSA29-BBStock Code:WMBB-BB-BSA29-BB-6Stock Code:WMBB-BB-BSA29-BB-9Stock Code:WMBB-BB-BSA29-BB-3Stock Code:WMBB-BB-BSA29-BB-4Stock Code:WMBB-BB-BSA29-BB-7Stock Code:WMBB-BB-BSA29-BB-1Stock Code:WMBB-BB-BSA29-BB-5
Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP)$209.00 (RRP) -
Stock Code:BBBB-T47-86/92-30-B5
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.$127.23 (RRP)Add To Cart
