Problem Solvers Holy Driver
Description
For quick and easy wheel building, the Holy Driver sets spoke nipples to the same depth. Simply cut a spoke and fix its length with the set screw.
- Insert a cut spoke into the sleeve to desired depth and lock setscrew with 2mm hex wrench
- Compatible with rims up to 45mm deep
- CroMoly with black oxidized finish
Webshops and Bike shops
You may also be interested in...
-
Stock Code:PSTL-TL1303
Thru-axle hubs just don't fit in the truing stand. Our adapters fit into common thru-axle sizes so you can true them up just like a wheel with a standard hub axle. We've also included o-rings so that the thru-axle caps are guided into the hub for a solid fit and stay secure when you remove the wheel to check your dish and stress-relieve the spokes.
- For9/15/20mm axles (pair)
- Developed in cooperation with Handspun Wheels (www.handspunwheels.com)
- Grooved with rubber o-rings
- CNC-machined AL-6061-T6$86.97 (RRP)POA -
Stock Code:CKTL-THB002Stock Code:CKTL-THB020Stock Code:CKTL-THB006Stock Code:CKTL-THB100Stock Code:CKTL-THB007$50.00 (RRP)$46.13 (RRP)$32.50 (RRP)$370.00 (RRP)$54.50 (RRP)
-
Stock Code:SLTL-TL0069
Surly Fat Bike Wheelbuilding Tools
· 35mm-wide spacer aids in dishing and truing Pugsley offset wheelsPOA -
Stock Code:HLTL-HUHADBST
If stubborn spockets mean that the DJD driver cannot be adequately held then this Workshop tool may be required.
CNC Made from steel.
Use as follows:
- Insert the tool securely into a bench vice.
- Remove the driver body from the hub assembly.
- Remove the 3 Pawls and spring.
- Insert the Pawl area of the driver body into the Bench tool.
- Use required chainwhip to remove the now securely held DJD driver body.$75.00 (RRP)Add To Cart
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP)
