- Home /
- Tools /
- Wheel Hubs /
- Halo DJD Supadrive Cog Removal tool
Halo DJD Supadrive Cog Removal tool
Description
Halo DJD Supadrive Cog removal tool.
Bench vice mounted.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKTL-THB011
This tool is required to remove the spline from Chris King driveshells, all models except R45.
Stock Level:Out Of StockStock Level:Out of Stock$43.21 (RRP) -
Stock Code:SLTL-TL0069
Surly Fat Bike Wheelbuilding Tools
ยท 35mm-wide spacer aids in dishing and truing Pugsley offset wheelsStock Level:Out Of StockStock Level:Out of StockPOA -
Stock Code:HLTL-HUHADBST
If stubborn spockets mean that the DJD driver cannot be adequately held then this Workshop tool may be required.
CNC Made from steel.
Use as follows:
- Insert the tool securely into a bench vice.
- Remove the driver body from the hub assembly.
- Remove the 3 Pawls and spring.
- Insert the Pawl area of the driver body into the Bench tool.
- Use required chainwhip to remove the now securely held DJD driver body.Stock Level:In StockStock Level:In Stock$75.00 (RRP)Add To Cart
-
Stock Code:WMTL-EX0001
These extractors remove sealed bearings with inside diameters from 8,9,10 and12mm.
Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
Removes these sealed bearing sizes: 608, 609, 6000, 6001
4-piece set includes:
(1) 8mm ID Bearing Extractor
(1) 9mm ID Bearing Extractor
(1) 10mm ID Bearing Extractor
(1) 12mm ID Bearing Extractor
(1) Spare parts bag
(1) M5 bolt setStock Level:In StockStock Level:In Stock$199.50 (RRP)Add To Cart
-
Stock Code:CKTL-THB100
The Chris King Universal Hub Tool is a high quality shop tool designed to completely disassemble and reassemble Chris King R45D, R45, Boost CL, Superboost, ISO, Classic, and BMX hubs. Though not required for basic adjustment or routine hub maintenance, it makes a striking addition to your tool set, allowing professional and home mechanics to perform complete hub overhauls and bearing service. A hub cone adjusting tool and comprehensive technical manual are included in the complete kit.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Made from USA sourced high quality aluminum and heat treated stainless steel
- Anodized finishStock Level:Out Of StockStock Level:Out of StockPOA