Abbey Team Issue Tool Box V1
Description
Abbey selected the best tools from the hand tool industry to compliment our top shelf bike tools. These are tools that professionals have relied on for years. We use many of them in the tool shop and Abbey Evangelists have used them in their service departments and race pits for decades.
Start with a Pelican case with subtle graphics on the shell with the custom touch of an engraved name tag in signature Abbey Green. Next are 3 layers of Kaizen Foam custom cut to keep the included tools organized, safe and secure. Abbey even included a small parts box for all your little items. The bottom layer gives you a couple options, you can use the large cutouts to store a bleed kit, lube, thread retainers or you can use the included foam to further customize the kit to build your perfect toolbox.
Included in this kit:
Abbey Bike Tools:
Crombie - Dual Sided TA
Whip-it for Dual Sided
HAG
Decade Chain Tool
Titanium Hammer
Wash Buddy, Complete
Team Issue Pedal Wrench
Crank Preload Tool
4 Way (2.5-3-4-5)
4 Way (T10-T15-T20-T25)
Stu Stick
Knipex:
Diagonal Flush Cutters
Pliers Wrench
Cable Cutter
Needle Nose
WERA:
9 piece Hex Plus Set With Ball End
1mm flat blade Screw Driver
#2 Phillips Screw Driver
9pcs Ball End Torx Set
2.0mm Hex Plus Driver
3.0mm Hex Plus Driver
Other:
Pelican case M2200
Pelican 1920 Flashlight
Klein Scissors
Plano Box
Starrett Tape Measure in/cm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:EVTL-EVTBG100
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valvesExpected Date:28 May 2026$173.00 (RRP) -
Stock Code:EVTL-EVTBG30
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$173.00 (RRP) -
Stock Code:EVTL-EVTMF13
A must-have for the serious wheel builder, the Mulfinger is designed for speed, precision, and comfort. This tool dramatically cuts down the time it takes to load nipples onto spokes—turning a tedious step into a smooth, fast-flowing part of your build process.
Just start the Mulfinger on the spoke threads and spin away—it's that simple. Thanks to a precisely engineered 2° tapered tip, the tool creates a perfect friction fit with the nipple, giving you full control without slipping. This tool features a knurled fingertip-spinning surface for high speed driving.
Available in:
14ga (2.0mm)
14ga XL (2.0mm Extra-Long)
15ga (1.8mm)
13ga (2.3mm)$29.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTMF14
A must-have for the serious wheel builder, the Mulfinger is designed for speed, precision, and comfort. This tool dramatically cuts down the time it takes to load nipples onto spokes—turning a tedious step into a smooth, fast-flowing part of your build process.
Just start the Mulfinger on the spoke threads and spin away—it's that simple. Thanks to a precisely engineered 2° tapered tip, the tool creates a perfect friction fit with the nipple, giving you full control without slipping. This tool features a knurled fingertip-spinning surface for high speed driving.
Available in:
14ga (2.0mm)
14ga XL (2.0mm Extra-Long)
15ga (1.8mm)
13ga (2.3mm)$29.00 (RRP)Add To Cart
