EVT Bleedin Gauge 100PSI
Description
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-TIE-BLACK
Wheels MFG Zip Ties 200x2.5mm Black 100 piece
Light-duty zip tie
•200mm length x 2.5mm
•100 pieces
•Available in Black or ClearExpected Date:15 December 2026$21.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-XTR-CAP-DRIVER
The XTR Cap Driver is used for removing and installing the fixing bolt cap on XTR M9100 series crankarms. Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal.
$30.00 (RRP)Add To Cart
-
Stock Code:WMTL-ST0010Stock Code:WMTL-ST0009Stock Code:WMTL-ST0008
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters:
8mm
9mm
10mm
12.7mm
15mm
15.9mm
16.7mm$137.00 (RRP)$137.00 (RRP)$137.00 (RRP) -
Stock Code:SWTL-SACW
2-in-1 FOX-(Rockshox 2024+) Suspension Wrench
This 3D-printed multi-tool combines the 2 most common FOX fork tools into one compact, trail-ready wrench. Perfect for both workshop use and quick adjustments on the trail.$10.85 (RRP)Add To Cart
