Wheels MFG XTR Cap Driver
Description
The XTR Cap Driver is used for removing and installing the fixing bolt cap on XTR M9100 series crankarms. Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-JAR-TIE$87.00 (RRP)
Add To Cart
-
Stock Code:WTTLHAT-QR-ADPTStock Code:WTTLHAT-QR-KITStock Code:WTTLHAT-TA-KITStock Code:WTTLHAT-TAQR-KIT
Quick Release Adapter - add on part to allow the Thru Axle Kit to be used on quick release bikes
$48.41 (RRP)$136.99 (RRP)$234.84 (RRP)$284.28 (RRP) -
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punchExpected Date:20 May 2025$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$72.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$239.00 (RRP)$255.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WTTL-BBS4116Stock Code:WTTL-BBS4416Stock Code:WTTL-BBS4612Stock Code:WTTL-BBS4816
BBS4116: 16 notch BB socket for 41mm diameter notch pattern, Shimano 105, Ultegra BBR60 and 6800, XT MT-800
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack WrenchExpected Date:08 May 2025$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP) -
Stock Code:WMTL-ST0010Stock Code:WMTL-ST0009Stock Code:WMTL-ST0008
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters:
8mm
9mm
10mm
12.7mm
15mm
15.9mm
16.7mm$160.00 (RRP)$160.00 (RRP)$160.00 (RRP)
