Abbey Hanger Alignment Gauge HAG
Description
The HAG is the last hanger tool you'll ever have to buy.
WHY YOU NEED ONE
The derailleur hanger is the foundation for the modern drive train to work properly. With modern bikes getting as many as 13 cogs in the space that we use to put 8 it's never been more important to make sure the hanger is perfectly straight. Sadly many of the current tools just aren't capable of achieving this kind of precision.
WHAT MAKES THE HAG THE BEST
We went through extra steps to make this tool half precision measuring instrument and half pry bar.
- Tolerances as tight as a quarter of a thousandth of an inch (.0063mm) in some critical dimensions of this tool.
- Ability to lock in the feeler so you don't have to second guess your measurement after bumping it on the tire. T
- Top half of tool will rotate out of the way of fender stays and frame tubes.
- Feeler gauge stick stores inside the top half of the tool, very handy for the traveling mechanic.
- T bolt extends past the tool for access to those problematic hangers found on some modern full suspension bikes.
- Re-buildable. While ideally your HAG should be sent back for a rebuild, it is possible to do them in the field by replacing the brass bushing in the T-Bolt.
Made in Bend Oregon.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6450696
TOOLS NOT INCLUDED.
Revamped layout with expanded tool/part capacity and added hanging options.
Convert into a rigid tool pallet with included x-frame system.
Durable construction and waterproof exterior keeps tools protected.
Compact and perfect for the car, traveling to an event, or a minimalist home shop setup.
Hungry to get your tools organized, protected, and ready for action? Then chow down on the Pedro's Burrito Tool Roll II. This professional grade tool roll features a large 23x16in (60x40cm) surface with reinforced pockets in assorted sizes, versatile elastic strap pockets, elastic hex bit pockets, and a large mesh zipper pocket to securely hold small parts or personal items. The Burrito II also features a unique x-frame system that converts the flexible roll into a rigid tool pallet. Unroll, install the frame poles, hang off a repair stand or tool case, and get to work. When it's time to pack up, the waterproof exterior and internal flap keep you tools protected and velcro straps keep everything in check.$145.00 (RRP)Add To Cart
-
Stock Code:PDTL6460630
Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1 percent and is then tested 5 times prior to packaging with results recorded on the product card along with the date.
Infinite torque-limiting clutch design eliminates over-torquing.
Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included.
Ergonomic handle design provides comfort and control and stores extra bits.$75.00 (RRP)Add To Cart
-
Stock Code:RLTL-SNS880
SNS880 - Sealant and Suspension Hose 8x80mm
Silicone tube is durable and flexible fitting in and over many situations.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Silicone construction does not allow fluids to stick
8mm OD fits in many suspension applications
5mm ID fits around tubeless valves
Guaranteed For Life!$12.00 (RRP)Add To Cart
-
Stock Code:SWTL-UCS-SM
Ultimate Clamp Set Small | All Shaft Sizes from 8mm to 5/8"
The most complete clamp set for small shafts. Covers every size you could ever encounter, from 8 mm up to 5/8". Works on coil shocks, damper shafts, and most air shocks.
This is the best bang for your buck, one kit that does it all for small-diameter suspension work.
Important Warning:
- Never clamp directly on a damper body or shaft without the proper tool.
- Always clean with isopropyl alcohol and wrap in 1 layer of paper towel to reduce clamping force.
Compatibility Notes:
- Compatible with nearly all coil shocks and damper shafts
- Works on most inline air shocks (Fox Float X, DPX2, RockShox Super Deluxe, etc.)$77.00 (RRP)Add To Cart
