Pedros Fixed Torque Driver - 4Nm
Description
Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1 percent and is then tested 5 times prior to packaging with results recorded on the product card along with the date.
Infinite torque-limiting clutch design eliminates over-torquing.
Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included.
Ergonomic handle design provides comfort and control and stores extra bits.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:15 December 2026Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-BP0001
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.
The Bearing Press Pro Kit installs 14 bearing sizes including today's most common bottom bracket and thru axle bearings. The kit also includes linkage offsets for full suspension bearing installation and 7 speed spacers for faster installs. All parts are laser etched for easy identification.
PRESS-1 includes:
(2) T-Handles with 3/8" Acme threaded rod
(2) 15mm x 25mm Speed Spacer
15mm x 35mm Speed Spacer
17mm x 25mm Speed Spacer
17mm x 35mm Speed Spacer
20mm x 25mm Speed Spacer
20mm x 35mm Speed Spacer
(2) 30mm Speed Spacer
(2) 20mm frame linkage standoffs
(2) 30mm frame linkage standoffs
Open Bore Drifts for the following bearing sizes:
(2) 6802
(2) 6803
(2) 6804
(2) 6901
(2) 6902
(2) 6903
(2) 15x26
(2) 27.7x37
Over Axle Drifts for the following bearing sizes:
(2) 6802x20mm
(2) 6803x20mm
(2) 6804x20mm
(2) 6901x40mm
(2) 6902x7mm
(2) 6903x7mm$445.00 (RRP)Add To Cart
-
Stock Code:PDTL6450800
Perfect at any event, in the shop, or at home
Large, laminated work-top surface, two height settings, and durable design.
Folds flat for efficient storage and easy transport.
Pedro's Portable Workbench is perfect at any event, in the shop, or at home with plenty of space to hold a tool kit, loose tools and bike care, and components. With a large, laminated work-top surface, two height settings, and durable design, this bench is perfect for creating a dialed setup to work on any bicycle in any location. When not in use the bench folds flat making for efficient storage and easy transport. Dimensions of table are 120cm X 47cm X 82cm when set up and 120cm X 47cm X 10cm when folded. Table weight is approximately 30lbs (14kg). Limited three-year warranty.POA -
Stock Code:ABTL-SLPRS-DRVR32MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
-
Stock Code:ABTL-SLPRS-DRVR38MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)
