Wheels MFG Bearing Press Pro Kit
Description
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.
The Bearing Press Pro Kit installs 14 bearing sizes including today's most common bottom bracket and thru axle bearings. The kit also includes linkage offsets for full suspension bearing installation and 7 speed spacers for faster installs. All parts are laser etched for easy identification.
PRESS-1 includes:
(2) T-Handles with 3/8" Acme threaded rod
(2) 15mm x 25mm Speed Spacer
15mm x 35mm Speed Spacer
17mm x 25mm Speed Spacer
17mm x 35mm Speed Spacer
20mm x 25mm Speed Spacer
20mm x 35mm Speed Spacer
(2) 30mm Speed Spacer
(2) 20mm frame linkage standoffs
(2) 30mm frame linkage standoffs
Open Bore Drifts for the following bearing sizes:
(2) 6802
(2) 6803
(2) 6804
(2) 6901
(2) 6902
(2) 6903
(2) 15x26
(2) 27.7x37
Over Axle Drifts for the following bearing sizes:
(2) 6802x20mm
(2) 6803x20mm
(2) 6804x20mm
(2) 6901x40mm
(2) 6902x7mm
(2) 6903x7mm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punchExpected Date:20 May 2025$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$72.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$239.00 (RRP)$255.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:20 May 2025Expected Date:20 May 2025Expected Date:20 May 2025$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WTTLFWI-CISStock Code:WTTLFWI-H16Stock Code:WTTLFWI-H8Stock Code:WTTLFWI-KIT-01Stock Code:WTTLFWI-LRStock Code:WTTLFWI-S20Stock Code:WTTLPACKWRENCH
Ultralight Cinch and ISIS Spline Wrench Insert - older ISIS bottom brackets or the Race Face Cinch direct mount chainring system.
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
- The aluminum wrench (sold separately) has magnets that hold the inserts in place
- Made in the USA and CNC machined from hardened steel with electroless nickel plating
- Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.$39.14 (RRP)$48.41 (RRP)$48.41 (RRP)$225.57 (RRP)$39.14 (RRP)$39.14 (RRP)$100.00 (RRP) -
Stock Code:WTTLHAT-QR-ADPTStock Code:WTTLHAT-QR-KITStock Code:WTTLHAT-TA-KITStock Code:WTTLHAT-TAQR-KIT
Quick Release Adapter - add on part to allow the Thru Axle Kit to be used on quick release bikes
$48.41 (RRP)$136.99 (RRP)$234.84 (RRP)$284.28 (RRP) -
Stock Code:BBTL-TO-BOTTOMBRACKET3
Allows disassembly and assembly of bottom brackets bearings:
24mm / 25mm / 30mm / BB86 / BB92 / BB95 / BSA24 / BSA30 / 386EVO$590.00 (RRP)Add To Cart
