Pedros Portable Work Bench
Description
Perfect at any event, in the shop, or at home
Large, laminated work-top surface, two height settings, and durable design.
Folds flat for efficient storage and easy transport.
Pedro's Portable Workbench is perfect at any event, in the shop, or at home with plenty of space to hold a tool kit, loose tools and bike care, and components. With a large, laminated work-top surface, two height settings, and durable design, this bench is perfect for creating a dialed setup to work on any bicycle in any location. When not in use the bench folds flat making for efficient storage and easy transport. Dimensions of table are 120cm X 47cm X 82cm when set up and 120cm X 47cm X 10cm when folded. Table weight is approximately 30lbs (14kg). Limited three-year warranty.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6450620
11 professional quality tools packed in a traditional tool box.
Tool selection focused on essential repair, adjustment, and replacement tasks.
Perfect for the car, traveling to an event, or a home shop setup.
The Starter Bench Tool Kit is designed for the aspiring mechanic looking to get started with the right professional quality tools and room to grow as new skills are learned.
Tool List:
Folding Hex/Screwdriver Set-2.5,3,4,5,6,+,-
8mm Hex Tip
T25 & T30 L Torx Wrenches
Tire Lever Pair - Yellow
Quick Link Pliers
Six Pack Chain Tool
Pro Travel Pedal Wrench
Pro Chain Whip
Pro Cassette Lockring Socket
Cable Cutter$225.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTKS8
The Knuckle Saver Pedal Wrench Adaptor helps removing stubborn hex-mounted pedal spindles, and is available in 6 and 8 mm versions.
Combine this tool with a pedal wrench to easily and safely remove or install. Position your hands for maximum leverage while ensuring they don't impact anything but air when it breaks loose. The knurled surface helps you spin it on and off.
Knuckle Savers work with any pedal wrench. This tool is also helpful with tight 8mm crank anchor bolts, especially self-extracting ones. Ergonomics are incalculably better than a naked hex wrench. Your tendons, joints and knuckles will thank you!$62.00 (RRP)Add To Cart
-
Stock Code:ABTL-FITKIT
This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit.
The magnetic saddle height bullets (8mm and 10mm sizes) ensure you get an accurate center at the bottom bracket by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate.
Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter, enough to satisfy the most particular or injury prone athlete.
The front of the saddle plate is engraved with a ruler (metric of course) to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages.
The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo. This kit is ideal for cyclists that travel and regularly have to re-assemble their bike, bike fitters and mechanics in the workshop and in the field.
The complete kit includes the saddle plate, Shimano preload crank tool, two saddle height bullets (8mm and 10mm). The Shimano preload crank tool and saddle height bullets can be purchased separately.
Made in Bend Oregon.$266.00 (RRP) -
Stock Code:ABTL-MDPLT-AXS
For use with the Decade Chain Tool this AXS Mid Plate is required for the SRAM AXS Road and the new MTB Transmission Flat Top chains. This part is not needed for other 12spd chains from various manufactures. This Mid Plate is visually differentiated from the other Decade Mid Plates by three dots on the face of the plate.
Made in Bend Oregon.$41.00 (RRP)Add To Cart
