Abbey Soft Face for Shop Hammer

You may also be interested in...

• 

  ×

  Stock Code:

  BBTL-TO-BOTTOMBRACKET3

  Blackbearing Crankset Bearing Assembly K

  Allows disassembly and assembly of bottom brackets bearings:
  
  24mm / 25mm / 30mm / BB86 / BB92 / BB95 / BSA24 / BSA30 / 386EVO

  Stock Level:

  1

  Stock Level:

  1

  $590.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  PDTL6451250

  Pedros Cable Cutter

  Bicycle Cable and Housing Cutter
  Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance.
  Ergonomic, cushioned grip, and high leverage design for comfort and ease of use.
  Quickly and cleanly cuts brake and derailleur cables, housing, and other wires.
  Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.

  Stock Level:

  Out Of Stock

  Stock Level:

  Out of Stock

  $55.00 (RRP)

  Notify When in Stock
• 

  ×

  Stock Code:

  EVTL-EVTBG15

  EVT Bleedin Gauge 15PSI

  The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
  
  Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
  
  Or just use it to see how far off your floor pump really is.
  
  Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
  
  *Compatible with Presta valves only. Not compatible with Schrader valves

  Stock Level:

  1

  Stock Level:

  1

  $173.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  ABTL-FITKIT

  Abbey Fit Kit

  This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit.
  
  The magnetic saddle height bullets (8mm and 10mm sizes) ensure you get an accurate center at the bottom bracket by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate.
  Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter, enough to satisfy the most particular or injury prone athlete.
  The front of the saddle plate is engraved with a ruler (metric of course) to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages.
  The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo. This kit is ideal for cyclists that travel and regularly have to re-assemble their bike, bike fitters and mechanics in the workshop and in the field.
  
  The complete kit includes the saddle plate, Shimano preload crank tool, two saddle height bullets (8mm and 10mm). The Shimano preload crank tool and saddle height bullets can be purchased separately.
  
  Made in Bend Oregon.

  Stock Level:

  1

  Stock Level:

  1

  $266.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  ABTL-WRNCH-BBQV2

  Abbey Shop Pedal Wrench

  With many pedal manufactures going away from 15mm wrench flats the traditional pedal wrench is becoming obsolete. To further complicate things some manufactures require both 6 and 8 mm keys within their product range. This means it's hard to know exactly what tool to grab for pedal removal or installation. Enter the Abbey Shop Pedal Wrench. With the once standard 15mm box end on one end and a custom 6 and 8 mm swivel bit on the opposite end it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, rental fleet counter and certainly at the tool bench.
  
  The shop version of the tool gets an extra 2" (5 cm) of leverage over the team issue for an overall length of 14.5" Great for removing those suborn pedals. The tool receives a durable black Cerakote finish.
  
  Made in Bend Oregon

  Stock Level:

  2

  Stock Level:

  2

  $242.00 (RRP)

  Add To Cart

  Qty: