Pedros Tape Measure
Description
Tape Measure
3 Meter/9.8 Foot Metric/English Tape Measure with Instant Lock Tape
Compact size perfect for toolbox or pocket.
Ergonomic, durable design with instant-lock tape for easy use.
Features centimeter and inch scales for measurements up to 3 meters/9.8 feet.
Measurements are an essential part of bicycle mechanics needed for everything from bike fitting, to component positioning, and much more. The Pedro's Tape Measure is perfect to tackle any bike measure task featuring a compact design and small details that make a difference. Our instant locking design is the opposite of most tape measures on the market and is truly handy when trying to juggle a bike, tools, and make a measurement at the same time. The small size is just right for the toolbox and won't take up valuable space needed for other tools. Backed by Pedro's lifetime warranty.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:ABTLABTPRESSHV2
This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amateur should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. Then we added a pair of 5" machined handles for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in.
Kit includes a complete handled press head, 12" press shaft, quick nut and the following drifts;
PF30/1.125" headset
24mm bottom bracket drifts, for shimano compatible bottom brackets
22mm bottom bracket drift, single drift for non drive GXP bottom bracket
28.9mm bottom bracket drift, for SRAM DUB
6806 drift for BB30 bottom brackets
1.5" headset drift
centering cone
Additional drifts are on the bearing page and longer press shafts along with service parts are available on the parts page.
We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.
Made in Bend Oregon.$635.00 (RRP)Add To Cart
-
Stock Code:RLTL-LTPK20L
This Is Kit Includes:
1. LTP20 - Loobtoob Pro 20ml Syringe
1. BS1210- Large Brush-it Applicator
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP20 - Loobtoob Pro 20ml Syringe
Crushproof fully featured Pro syringe with a 20ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
1ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
BS1210- Large Brush-it Applicator
Nylon brush applicator with a large 12x3mm tip, for large projects.
Material dispenses into the brush for clean, convenient one handed application.
For use on large areas, clamping surfaces or large fasteners.
Luer-Lock Compatible
Seamless Stainless Steel
Durable Nylon Bristles
Crushproof Polypropylene Connector
10 gauge Opening for Large Dosing$28.00 (RRP) -
Stock Code:RLTL-LTPK20M
This Is Kit Includes:
1. LTP20 - Loobtoob Pro 20ml Syringe
1. BS814- Medium Brush-it Applicator
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP20 - Loobtoob Pro 20ml Syringe
Crushproof fully featured Pro syringe with a 20ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
1ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
BS814- Medium Brush-it Applicator
Nylon brush applicator with a medium 8x3mm tip, for general projects.
Material dispenses into the brush for clean, convenient one handed application.
For use on fasteners, medium sized areas, clamping surfaces.
Luer-Lock Compatible
Seamless Stainless Steel
Durable Nylon Bristles
Crushproof Polypropylene Connector
14 gauge Opening for Precise Control
Guaranteed for life!$26.00 (RRP)
