Radlabs Loobtoob Pro 10ml + Brush-it MD
Description
This Is Kit Includes:
1. LTP10 - Loobtoob Pro 10ml Syringe
1. BS814- Medium Brush-it Applicator
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP10 - Loobtoob Pro 10ml Syringe
Crushproof fully featured Pro syringe with a 10ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
0.50ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
BS814- Medium Brush-it Applicator
Nylon brush applicator with a medium 8x3mm tip, for general projects.
Material dispenses into the brush for clean, convenient one handed application.
For use on fasteners, medium sized areas, clamping surfaces.
Luer-Lock Compatible
Seamless Stainless Steel
Durable Nylon Bristles
Crushproof Polypropylene Connector
14 gauge Opening for Precise Control
Guaranteed for life!
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:03 July 2026Expected Date:03 July 2026Expected Date:03 July 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:03 July 2026Expected Date:03 July 2026Expected Date:03 July 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6450620
11 professional quality tools packed in a traditional tool box.
Tool selection focused on essential repair, adjustment, and replacement tasks.
Perfect for the car, traveling to an event, or a home shop setup.
The Starter Bench Tool Kit is designed for the aspiring mechanic looking to get started with the right professional quality tools and room to grow as new skills are learned.
Tool List:
Folding Hex/Screwdriver Set-2.5,3,4,5,6,+,-
8mm Hex Tip
T25 & T30 L Torx Wrenches
Tire Lever Pair - Yellow
Quick Link Pliers
Six Pack Chain Tool
Pro Travel Pedal Wrench
Pro Chain Whip
Pro Cassette Lockring Socket
Cable Cutter$225.00 (RRP)Add To Cart
-
Stock Code:PDTL6451201
Compact Crank Remover
- Made from heat-treated tool steel.
- New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles.
- Precision tolerances provide perfect fit and floating tip design ensures easy crank removal.
- Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench or pedal wrenches.
Pedro's Compact Crank Remover provides the professional quality, precision fit tool required to properly remove press fit square taper or splined cranks.
The Crank Remover is made from heat-treated tool steel for the ultimate in strength and lasting performance and features a floating tip design for easy crank removal.
New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles. Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench, Equalizer Pedal Wrench, or 15mm Pedal Wrench.
Backed by Pedro's lifetime warranty.$30.00 (RRP)Add To Cart
-
Stock Code:ABTL-WRNCH-BBQV2
With many pedal manufactures going away from 15mm wrench flats the traditional pedal wrench is becoming obsolete. To further complicate things some manufactures require both 6 and 8 mm keys within their product range. This means it's hard to know exactly what tool to grab for pedal removal or installation. Enter the Abbey Shop Pedal Wrench. With the once standard 15mm box end on one end and a custom 6 and 8 mm swivel bit on the opposite end it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, rental fleet counter and certainly at the tool bench.
The shop version of the tool gets an extra 2" (5 cm) of leverage over the team issue for an overall length of 14.5" Great for removing those suborn pedals. The tool receives a durable black Cerakote finish.
Made in Bend Oregon$242.00 (RRP)Add To Cart
