Abbey Fork Seal Press Driver - 34mm
Description
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-XTR-CAP-DRIVER
The XTR Cap Driver is used for removing and installing the fixing bolt cap on XTR M9100 series crankarms. Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal.
$30.00 (RRP)Add To Cart
-
Stock Code:ABTLABTWHIPTRACK
We made these monster chain whips at the request of some of our long time customers who were working the world cup track circuit. When a world class sprinter stands on the pedals of their track bike it taxes everything between the sole of their shoe and the tire. This means that tiny little track cog is threaded onto the hub as if He-Man put it on. We've lengthened these track whips out to a massive 17"/432mm, made a reinforced tang specifically for the 1/8" chain and put them together with stainless aircraft rivets. It adds up to a bomber whip worthy of the fastest men and women in the world.
Not for use on multi geared bikes. Single Speed 1/8" only.
Made in Bend Oregon.$102.00 (RRP)Add To Cart
-
Stock Code:PDTL6400100
Tyre Levers 24 Pair Counter Display
- Award winning and universally loved.
- Molded box construction and proprietary plastic blend makes these the strongest levers available.
- Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping.
- Bold shape makes it easy to remove the tightest of tyres without bending or breaking.
Backed by Pedro's lifetime warranty, and we will happily replace them for you.POA
