Pedros Needle Nose Pliers
Description
These premium needle nose pliers feature a compact 6" (150mm) length, forged and heat-treated steel construction, and ergonomic dual-density grips. The self-opening jaws provide a full-featured profile, ready for gripping, crimping, and cutting tasks.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:03 July 2026Expected Date:03 July 2026Expected Date:03 July 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:SWTL-SACW
2-in-1 FOX-(Rockshox 2024+) Suspension Wrench
This 3D-printed multi-tool combines the 2 most common FOX fork tools into one compact, trail-ready wrench. Perfect for both workshop use and quick adjustments on the trail.$10.85 (RRP)Add To Cart
-
Stock Code:PDTL6451230
Freewheel Socket, Multi-Speed 12-Spline x 23mm
- Fits Shimano®, Sun Race®, Sachs®, and other 12 spline, 22.7mm diameter 5–10 speed freewheels and all Campagnolo® cassette lockrings and Record™, Chorus™, Centaur™, and Athena™ bottom brackets.
- Professional quality and precision sized for the perfect fit.
- Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise.
Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components.$22.00 (RRP)Add To Cart
-
Stock Code:ABTL-HAG-THRDCAP
The little black cap to protect the HAG threads when not in use is designed to fit on the end of the T handle. Perhaps you didn't realize that and instead set it down, put it in your pocket, or decided to hold it in your mouth and accidentally started chewing.
We suggest purchasing an extra just in case...$3.00 (RRP)Add To Cart
-
Stock Code:ABTL-SHP-SHPCHNWHP
What good is a Shop Crombie tool without the matching whip?
There's a little more that went into the Shop Duty Whip-It than the matching Crombie. We stuck with the proven construction of a machined tang welded into a handle. We did add some length to the handle, as much as we could while still fitting inside a 700c/29'er wheel and of course it got the matching grip. We also worked with KMC to get some more robust chain from their E bike chain. These chains have a 28% stronger pin design that helps them stay together when your wrist rolls under heavy torque. We also widened the tang everywhere the chain doesn't attached to add stiffness and give the chain more support. Then we heat treat everything to get the most out of the steel.
The other little tweak we did involves magnets. Now we don't pretend to understand how magnets work but they're kind of handy for keeping the chain wrapped around the cassette and keeping the chain stowed when not in use. We're also offering these as parts for the existing Whip-It.
Made in Bend Oregon.$125.00 (RRP)
