Pedros Pig Guts Chain Pig Rebuild Kit
Description
Includes 3 Brush Wheels, 2 Outer Brushes, and 1 Sponge.
Works with Chain Pig and Chain Pig II.
Make your Chain Pig like new again! The Pig Guts - Chain Pig Rebuild Kit includes a full set of internal cleaning components.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-TIE-BLACK
Wheels MFG Zip Ties 200x2.5mm Black 100 piece
Light-duty zip tie
•200mm length x 2.5mm
•100 pieces
•Available in Black or Clear$21.00 (RRP)Add To Cart
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:07 May 2026Expected Date:07 May 2026Expected Date:07 May 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-ST0010Stock Code:WMTL-ST0009Stock Code:WMTL-ST0008
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters:
8mm
9mm
10mm
12.7mm
15mm
15.9mm
16.7mm$137.00 (RRP)$137.00 (RRP)$137.00 (RRP) -
Stock Code:ABTLABTDUBCAP
This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses.
Compatible with all SRAM dub cranks, road/mountain/gravel.
Made in Bend Oregon.$63.00 (RRP)Add To Cart
-
Stock Code:SWTL-SDTPRO
Universal Rear Shock Dummy Tool – PRO Version
The PRO version is the heavy-duty, workshop-grade upgrade to our standard Rear Shock Dummy Tool. Built for mechanics and advanced users who frequently switch between eyelet and trunnion mounting, it’s stronger, stiffer, and optimized for repeated use.
Adjustment Range:
165 mm to 250 mm (and up to ~266 mm for legacy sizes). One full rotation = 10 mm of length change. Set your eye-to-eye and lock it in seconds.
What Makes It PRO
- Full top-section swap: Unscrews completely for instant conversion between eyelet and trunnion. Each adapter self-aligns perfectly perpendicular.
- High-strength polymer body: Thicker, stiffer, and designed to withstand repeated workshop use without flexing.
- Maintenance-friendly interface: If the top gets snug, insert a screwdriver in the slot to unscrew. No need to overtighten.
- Heavy-duty load capacity: Over 20 kg of static load (not for riding or sitting).
- Thread-and-align system: Rotate until the Triangle marks your length. Going 10 mm under is still good practice for eyelet clearance.$77.90 (RRP)Add To Cart
