Whisky Spano Carbon Dropbar 44cm
Description
Whisky’s all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar’s flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories.
- Compound flare — 12 degrees at the hoods and 20 degrees through the drops
- Drop/Reach: 100mm/68mm
- 31.8 clamp diameter
- Di2 compatible with bar end junction for 1x drivetrain setups
Webshops and Bike shops
You may also be interested in...
-
Stock Code:TNHB-HB-E116
A flat bar with an off center clamp area allowing a flat riding position and reversible for an 8mm drop for 29 inch bikes. 8° of backsweep for comfort. 730mm (29?) in width for plenty of leverage.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 185g
*NOT SUITABLE FOR BAR ENDS$320.00 (RRP) -
Stock Code:TNHB-HB-E115Stock Code:TNHB-HB-E132Stock Code:TNHB-HB-E133Stock Code:TNHB-HB-E134
800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems
Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.
Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.
Weight 295 g
The perfect addition to your Elite X4 Stem or Direct Mount Stem.Was:$199.00 (RRP)Now:$132.00 (RRP)Price:$132.00 (RRP)$215.00 (RRP)$215.00 (RRP)$215.00 (RRP) -
Stock Code:SLHB-HB2695
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain.
Back Sweep (deg): 34 deg
Bar Clamp Diameter (mm): 31.8 mm
Weight: 400 g
Lever Compatability: Mountain 22.2
Material: Aluminum
Rise: 40 mm
Width: 735 mmPOA -
Stock Code:SMHB278031
Riser bar with extra bend and lots of rise. Try it for bike packing or commuting. Also a bar to look at if your bike feels like it has too much reach or too little stack.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 70mm
– Backsweep: 30 degrees
– Upsweep: 5 degrees
– Weight: 470g
(Not made for aggressive Enduro or DH riding)$210.00 (RRP)Add To Cart
-
Stock Code:TNHB-HB-E113
Titanium gives you a ride quality unavailable in other materials. Thomson manufacturing gives you light weight and no shims at the stem clamp. Two sweeps are available in the flat bar design and a riser bar is also available.
15mm Riser 8° Back 4° Up 31.8mm 780mm
345 grams$550.00 (RRP)
