SALSA COMPONENTS
-
Stock Code:SARK-RK8032POA
-
Stock Code:SADH-FS1315Stock Code:SADH-FS1319
Salsa Alternator 1.0 Hardware Set for 2011-2012 Ti frames and all 2013+ Aluminum frames
POAPOA -
Stock Code:SADH-FS1313POA
-
Stock Code:SADH-FS1381POA
-
Stock Code:SADH-FS1384
Salsa Alternator 1.0 Plate Right QR with Derailleur Hanger and Fender Mount
POA -
Stock Code:SADH-FS1318POA
-
Stock Code:SADH-FS1312POA
-
Stock Code:SADH-FS1376
Salsa Alternator 1.0 Plate Right thru-axle M12x1.5 thread pitch Single Speed
POA -
Stock Code:SADH-FS2356
Salsa Alternator 2.0 Dropout Plate Left Adjustable Thru-Axle M12
Alternator 2.0 is the latest iteration of Salsa’s adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system.
Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing
Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle
Note: This part number only includes a single Alternator 2.0 platePOA -
Stock Code:SADH-FS0719
Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance.
- Compatible with frames designed for the Alternator Flat Mount standard
- Allows the rear axle to be adjusted through a 15 mm range
- Thru-axle diameter = 12 mm; thread pitch = 1.5
Note: This part number only includes a single Alternator Flat Mount plate
- Uses Salsa 465 replaceable derailleur hanger (FS2322), sold separately. Also requires Salsa Axle Stud kit (FS1181)POA -
Stock Code:SARK-RK8066
The Alternator 135 Low Deck fits Salsa 135mm-spaced, non plus-sized tire, Alternator dropout equipped frames. It features a lower and narrower deck that fits over and around tires up to 2.4” (without fenders), as well as 700c and fender set ups.
NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points
NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts
Tubular 6061-T6 aluminum construction
135 x 345mm cupped deck
Extra-long struts for improved range of fit; straight and shaped (kinked) struts included
Black powder coat finishPOA -
Stock Code:SARK-RK8051
Alternator Racks are the perfect solution for Salsa bicycles equipped with the Alternator dropout system. Load up your bags and gear, get off the beaten track, and start exploring!
- Designed for frames with 135 - 148mm spacing, and clearance for 29 x 3.0" / 27.5 x 3.25" tires
- Rack mounts to the upper pivot bolt of the Alternator Dropout, using included hardware mounting kit
- Compatible with Alternator 1.0 and 2.0 dropouts
- 135 x 325mm cupped deck
- Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included
- Large pannier hook stops
- 765g
- 27kg maximumExpected Date:11 November 2025$215.00 (RRP)POA -
Stock Code:SADH-FS0252
Salsa Alternator 1.0 and 2.0 UDH Kit for flat-mount brakes.
- This Alternator Plate set works with all Alternator 1.0 and Alternator 2.0 compatible Salsa frames to allow the use of SRAM Full Mount derailleurs or SRAM UDH.
- Fixes wheel in rearmost Alternator plate position (17mm back)
- Native 140mm flat-mount disc brake compatibility
- Kit includes non-driveside upper mounting bolt for steel and titanium frames. Also includes lock nut that replaces IS brake adaptor to secure plate. All other hardware is re-used from current plates or can be purchased in the Alternator 1.0 or Alternator 2.0 Hardware Kit.
- Requires a 12mm thru axle with 1.0TP and either a SRAM UDH or SRAM Full Mount derailleur (not included). 148mm hubs use 175L 1.0TP 14TL M12, 142mm hubs use 171L 1.0TP 14TL M12.POA -
Stock Code:SADH-FS0251
Salsa Alternator 1.0 and 2.0 UDH Kit for post-mount brakes.
- This Alternator Plate set works with all Alternator 1.0 and Alternator 2.0 compatible Salsa frames to allow the use of SRAM Full Mount derailleurs or SRAM UDH.
- Fixes wheel in rearmost Alternator plate position (17mm back)
- Native 160mm post-mount disc brake compatibility (no IS adaptor required)
- Kit includes 2 non-driveside upper mounting bolts, the longer one is for carbon and aluminum frames, the shorter one is for steel and titanium frames. Also includes lock nut that replaces IS brake adaptor to secure plate. All other hardware is re-used from current plates or can be purchased in the Alternator 1.0 or Alternator 2.0 Hardware Kit.
- Requires a 12mm thru axle with 1.0TP and either a SRAM UDH or SRAM Full Mount derailleur (not included). 197mm hubs use 224L 1.0TP 14TL M12, 148mm hubs use 175L 1.0TP 14TL M12, 142mm hubs use 171L 1.0TP 14TL M12.POA -
Stock Code:SARK-RK1101
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts.
- Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps
- Constructed with glass-filled nylon for strength and durability
- Holds gear low on fork blades or down tubes with Three-Pack mounts
- Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps
- Maximum load: 6.6 lb (3 kg)Expected Date:11 November 2025$49.00 (RRP)POA -
Stock Code:SACL-JT9297
This long-sleeve jersey lets you take on cool-weather rides or layer up for colder days. It’ll keep you warm and dry through three-season riding and comes loaded with features you’ll appreciate on the bike.
Pactimo Aero Fit
Breathable thermal fabric for optimum performance fit and weather protection
Full-length YKK locking zipper with reflective strips on either side
Three rear pockets with larger center pocket for bulky accessories
A zippered valuables pocket
Ultra-soft silicone grip hem$249.00 (RRP)POA -
Stock Code:SACL-CL10967
This pom-equipped beanie keeps noggins warm and fashionable.
Soft, 100% acrylic construction
One size fits most$49.00 (RRP)POA -
Stock Code:SAHB-HB8270
For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23° sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong and durable, and great for long days bikepacking, touring, or shredding singletrack.
Constructed using double-butted, AL-7050-T76 aluminum
Bar sweeps forward, then back, to preserve stem length
5° upsweep allows adjustment to suit personal preference
Bar can be flip-flopped to run up or down
Graduated ends for easy trimming
Bead-blast black finish
17° sweep, 710mm widthPOA
