- Home /
- Tools /
- Bottom Bracket /
- Wheels MFG 22mm Bearing Extractor Set
Wheels MFG 22mm Bearing Extractor Set
Description
Sealed bearing extractor for 22mm ID (GXP) bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
This extractor is part of a system that requires additional pieces to function.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKTL-TBB006
Chris King Bottom Bracket cup installation tool required for the installation of Chris King ThreadFitâ„¢ 30, T47 30x and 24x bottom brackets.
Stock Level:Out Of StockStock Level:Out of StockExpected Date:06 June 2024$85.00 (RRP) -
Stock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individuallyStock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:1Stock Level:1Stock Level:In StockStock Level:2Stock Level:1Stock Level:2Stock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-24X37-EXT
Individual extractor for removing 24x37 sealed bearings with 24mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.Stock Level:2Stock Level:2$49.35 (RRP)Add To Cart
-
Stock Code:WMTL-BP0019
Compatible with all Wheels Manufacturing (SRAM T47) bottom brackets that have the following spline patterns: 52mm, 16-notch 1/2 UNC threaded Press Rod.
SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red.Stock Level:In StockStock Level:In Stock$84.00 (RRP)Add To Cart
-
Stock Code:BTTL-100000212Stock Level:In StockStock Level:In Stock$58.00 (RRP)
Add To Cart