Wheels MFG 6806 Bearing Extractor
Description
Individual extractor for removing 6806 sealed bearings with 30mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individuallyStock Level:In StockStock Level:In StockStock Level:1Stock Level:1Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:Out of StockStock Level:1Stock Level:2Stock Level:2Stock Level:Out of StockStock Level:2Stock Level:In StockExpected Date:29 July 2024$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-6003-EXT
Individual extractor for removing 6003 Bearing ID: 17mm / OD: 35mm / Width: 10mm
Stock Level:In StockStock Level:In Stock$46.20 (RRP)Add To Cart
-
Stock Code:WTTLOP2GRNStock Level:Out Of StockStock Level:Out of Stock$25.00 (RRP)
-
Stock Code:WTTLPACKWRENCH
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end (also often used for centerlock rotors). The 1-inch hex end features magnets that quickly couple with our steel hex insert tools. The side of the tool has a chainline measurement ruler.
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this, we developed some very specific "Pack Tools" that are high quality but weight conscious for those who perform mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail.
** Includes the wrench only. Steel inserts are not included but can be purchased separately or as a set.
- 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts.
- 16 notch 44 mm bottom bracket tool (or center lock rotor tool) compatibleStock Level:Out Of StockStock Level:Out of Stock$76.00 (RRP) -
Stock Code:WMTL-E-BIKESOCKET08
Compatible with Bafang Outer M33 lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.Stock Level:1Stock Level:1$52.50 (RRP)Add To Cart