Wheels MFG 30MM Bearing Extractor Set
Description
Sealed bearing extractor for 30mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
This extractor is part of a system that requires additional pieces to function.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKTL-TBB007
The Chris King® Bottom Bracket External Cup Tool is anodized aluminum and features a 3/8" socket drive. Ahigh-quality torque wrench is recommended for installation. The spline interface on the reverse side perfectly matches the Chris King® Bottom Bracket cups to ensure a secure fit during installation while preventing damage to the finish of the bracket.
For use with Chris King Threadfit T47 30i and 24i Bottom Brackets.Expected Date:06 June 2024$90.00 (RRP) -
Stock Code:WMTL-24X37-EXT
Individual extractor for removing 24x37 sealed bearings with 24mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.$49.35 (RRP)Add To Cart
-
Stock Code:WMTL-BP0006
Designed to press in all current Wheels Mfg bottom brackets! Our do-it-all Essential Bottom Bracket Press. Economical and easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod and one machined aluminum frame drift.
Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed in the Compatibility tab below. No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press.
1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also can be used as a frame bottom bracket shell sizing guide! Machined aluminum handles and drifts Red anodized drifts and handles Steps on drift are marked with diameter sizes Zinc-plated 1/2" diameter threaded rod Works with BB shells up to 132mm wide Includes one frame drift.
- 6802/29 OB 1/2" x 2
- 22x37 Drift 1/2" x 2
- 6806 OB 1/2" x 2
- 24x37 OB 1/2" x 2
- 1/2" Frame Drift
- 1/2-13 x 9.7" Threaded Rod UNC$210.00 (RRP)Add To Cart
-
Stock Code:WMTL-BP0007
Complete tool kit for installing Wheels Manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings:
- 22mm
- 24mm
- 29mm
- 30mm
Bottom Bracket Press Pro Install Kit includes:
- UNC 48mm 16-notch Socket x 1
- 22x37 DRIFT 1/2" x 1
- 6806 OB 1/2" x 2
- 24x37 OB 1/2" x2
- 1/2" FRAME DRIFT x 1 1/2-13 x 9.7"
- THREADED ROD UNC x 1 44-48.5mm
- DOUBLE 16-notch 1/2" SOCKET x 1
- THREADED HANDLE x 2$367.50 (RRP)Add To Cart
-
Stock Code:WMTL-BP0023
Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 44mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red
- 44mm
- 16 Notch
- 6061 Aluminum$85.00 (RRP)Add To Cart
