Wolf Tooth PackHanger Alignment QR Kit

Stock Code:
WTTLHAT-QR-KIT
Price:
Price: $118.49 (RRP)
Make an Enquiry

Description

Quick Release Kit - works on 5mm quick release bikes

The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle.

- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.

Find your Nearest Authorised
Webshops and Bike shops
Find a Dealer

You may also be interested in...

  • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    Stock Code:
    WMTL-6000OA-6
    Stock Code:
    WMTL-6001OA-7
    Stock Code:
    WMTL-6002OA-7
    Stock Code:
    WMTL-6003OA-7
    Stock Code:
    WMTL-6802OA-20
    Stock Code:
    WMTL-6803OA-20
    Stock Code:
    WMTL-6804OA-20
    Stock Code:
    WMTL-6900OA-40
    Stock Code:
    WMTL-6901OA-40
    Stock Code:
    WMTL-6902OA-7
    Stock Code:
    WMTL-6903OA-7
    Stock Code:
    WMTL-6904OA-7
    WHEELS MFG OVER AXLE ADAPTER

    Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.

    Installs: 6000 bearing
    Outer Diameter: 25.8mm
    Thickness: 6mm
    Thru Hole Diameter: 10.2mm
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (multiple adapters required for some installations)

    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)

    Add To Cart

    Notify When in Stock
  • Wheels MFG 6805(25mm) Bearing Extractor
    Stock Code:
    WMTL-6805-EXT
    Wheels MFG 6805(25mm) Bearing Extractor

    Individual extractor for removing 6805 sealed bearings with 25mm inside diameter.

    These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.

    All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt

    Stock Level:
    1
    Stock Level:
    1
    $49.35 (RRP)

    Add To Cart

  • Juice Lubes Sponge Job Clean Parts
    Stock Code:
    JLTL-SJCP1
    Juice Lubes Sponge Job Clean Parts

    - Suitable for use on all types of bike. Road, Cyclocross, MTB, Commuter
    - Incredibly durable – won’t tear or fall to bits if snagged like conventional sponges.
    - Super absorbent.
    - Fine pores to be very soft.
    - Kind on paint due to low dirt retention.
    - Sponge is ideal for General cleaning – Cloth for hard to reach areas.
    - Resistant to Bike Cleaner and other chemicals or cleaning agents.
    - High tensile strength.
    - Oil and general grime can be easily washed out with a quick squirt of Dirt Juice Bike Cleaner and a rinse with fresh water.
    - Reduces cleaning time.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $26.22 (RRP)

    Add To Cart

  • Juice Lubes Juice Rag Finish Cloth
    Stock Code:
    JLTL-JRAG1
    Juice Lubes Juice Rag Finish Cloth

    The Juice Rag is a microfibre cloth that’ll transform your bike from rags to riches. It’s your best buddy for the finishing strokes of your bike wash, polishing those fine details to perfection.

    Big and tough, yet soft and smooth, the Rag is great for buffing and burnishing, wiping up spills and giving everything a good rub down. The Juice Rag is machine washable, heavy duty and super absorbent.

    Washing instructions: Wash separately at 40°C, do not use fabric conditioner, do not machine dry.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $19.00 (RRP)

    Add To Cart

  • Wheels MFG E-bike Socket 43mm Gen3 Bosch
    Stock Code:
    WMTL-E-BIKESOCKET03
    Wheels MFG E-bike Socket 43mm Gen3 Bosch

    Compatible with 43mm Gen 3 Bosch Lockring.

    Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.

    Stock Level:
    2
    Stock Level:
    2
    $80.85 (RRP)

    Add To Cart