Wolf Tooth Pack Wrench
Description
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end (also often used for centerlock rotors). The 1-inch hex end features magnets that quickly couple with our steel hex insert tools. The side of the tool has a chainline measurement ruler.
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this, we developed some very specific "Pack Tools" that are high quality but weight conscious for those who perform mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail.
** Includes the wrench only. Steel inserts are not included but can be purchased separately or as a set.
- 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts.
- 16 notch 44 mm bottom bracket tool (or center lock rotor tool) compatible
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Stock Level:In StockStock Level:1Stock Level:In StockStock Level:1Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:Out of StockStock Level:In StockStock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-609-EXT
Individual extractor for removing 609 & 9227 sealed bearings with 9mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.Stock Level:2Stock Level:2$49.35 (RRP)Add To Cart
-
Stock Code:WTTLFWI-H16
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
The aluminum wrench (sold separately) has magnets that hold the inserts in place
Made in the USA and CNC machined from hardened steel with electroless nickel plating
Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.Stock Level:Out Of StockStock Level:Out of Stock$39.43 (RRP) -
Stock Code:WMTL-6002-EXT
Individual extractor for removing 6002, 6702, 6802, 6902, 15268 & 15267 sealed bearings with 15mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.Stock Level:Out Of StockStock Level:Out of Stock$49.35 (RRP) -
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individuallyStock Level:In StockStock Level:In StockStock Level:In StockStock Level:In StockStock Level:Out of Stock$15.75 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)