Wheels Mfg 386EVO Threaded A/C BB SHIMAN
Description
Threaded BB for 386EVO frames and 24mm diameter spindle cranks. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
No more creaking. Smooth operation. Fast bearing replacement.
Bottom Bracket/Frame Interface: BB386EVO, BB392EVO
Bottom Bracket Shell Width (mm): 86.5mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 24mm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKBB-PBB023Stock Code:CKBB-PBB024
Fits:
• Press Fit 30 BB Shells
• 73mm Wide BB Shells
• 24mm>22mm Mountain Cranksets
• Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn$48.28 (RRP)$54.08 (RRP) -
Stock Code:WMBB-BBUNIV-SRAM
The BBUNIV-SRAM kit adapts SRAM/Truvativ cranks to virtually any BB/PF30/BB30a frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm.
This kit includes 2 adapter shims and a 15-piece assortment of left and right side spacers.
Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank.
Machined engineering-grade Delrin.$118.00 (RRP)Add To Cart
-
Stock Code:WMBB-PF30-THD-BB
New PF30 bottom bracket with threaded cups. Don't rely on questionable frame tolerances. Our threaded cups ensure a tight, noise-free bottom bracket with proper bearing alignment.
Direct replacement for SRAM, FSA, and other PressFit 30 bottom brackets!
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: PF30, BBRight™ Press Fit, Specialized Carbon OSBB*
- Bottom Bracket Shell Width (mm): 61mm to 79mm*
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 30mm
- Will accept 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims
* Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers.
** Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$228.00 (RRP)Add To Cart
-
Stock Code:CKBB-PBB078
For DUB mountain cranks there are a few extra fitments notes to be aware of.
If you have a 68mm BB shell and a T47 bottom bracket you will need two of these 2.5mm Cup Spacers. SOLD INDIVIDUAL.$24.50 (RRP)Add To Cart
-
Stock Code:CKBB-AAB1Stock Code:CKBB-AAR1Stock Code:CKBB-AAS1Stock Code:CKBB-AAT2Stock Code:CKBB-AAY1Stock Code:CKBB-AAB2Stock Code:CKBB-AAM2Stock Code:CKBB-AAP1Stock Code:CKBB-AAZ2
REQUIRES A CHRIS KING THREADFIT24 FIT KIT
ThreadFit™ 24 fits 24mm cranks in 68mm BB shells.
Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for useExpected Date:27 June 2025Expected Date:27 June 2025Expected Date:27 June 2025$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)
