THOMSON DH ALLOY HANDLEBAR
800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems
Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.
Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.
Weight 295 g
The perfect addition to your Elite X4 Stem or Direct Mount Stem.
Our new Ø35mm x 800mm wide bar comes in 3 rise options: a center rise 10mm, 20mm rise, or 35mm rise option. All Ø35mm bars feature a 9° backsweep, and 5° upsweep. They’re built using 7050 Aluminum alloy for strength and longevity.
The Elite 35mm handle bars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, we produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.
Together with a 35mm Thomson X4 stem, it’s the best aluminum cockpit in the industry.
Our new Ø35mm x 800mm wide bar comes in 3 rise options: a center rise 10mm, 20mm rise, or 35mm rise option. All Ø35mm bars feature a 9° backsweep, and 5° upsweep. They’re built using 7050 Aluminum alloy for strength and longevity.
The Elite 35mm handle bars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, we produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.
Together with a 35mm Thomson X4 stem, it’s the best aluminum cockpit in the industry.
Our new Ø35mm x 800mm wide bar comes in 3 rise options: a center rise 10mm, 20mm rise, or 35mm rise option. All Ø35mm bars feature a 9° backsweep, and 5° upsweep. They’re built using 7050 Aluminum alloy for strength and longevity.
The Elite 35mm handle bars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, we produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.
Together with a 35mm Thomson X4 stem, it’s the best aluminum cockpit in the industry.
Webshops and Bike shops
Related Products
-
Description
Woodchipper is Salsa’s signature drop bar for off road riding, where it’s unique shape delivers comfort and control no matter how rough the terrain. Woodchipper bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop.
Unidirectional carbon fiber construction
Ergonomic design works well with integrated road shift/brake levers or bar-end shifters
Drop/Reach: 114/56mm
31.8mm clamp diameter with 140mm width for use with Salsa Anything Cradle and aerobars
27 deg flare and 38 deg drop angles
The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25 deg downward angle of the dropsPOA -
Description
- The Gravel bar featuring internal routing and 25 degree flare.
- The updated line up features satin finish, Toray lay up and Nano Epoxy Resin for very high impact resistance.
- The layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
- All carbon fiber is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
- They are made in one piece, not three pieces co-molded and glued together. The bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
- Flared dirt drop available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm -
Description
Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24 degree flare in the drops boosts leverage, stability, and comfort dramatically.
- Lightweight and strong 7050-T76 series alloy construction with polished finish
- Drop/Reach: 116/68mm
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- 24 deg flare and 12 deg drop anglesPOA -
Description
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence.
- Unidirectional carbon fiber construction
- 35.0 mm bar clamp diameter
- 8-degree back sweep with 5-degree up sweep
- 800 mm width with marked lines for easy trimming to desired width
- Tested to ASTM 4 for extreme off-road riding with drops up to 48 inchesPOA -
Description
Swept back town bike handlebar with generous width and leverage. Good option when using a porteur rack, basket or bar bag, since it doesn't sweep too forward.
• 6061-T6 aluminum
• Polished finish, silver or black
• Width: 650mm
• Rise: 25mm
• Center: 31.8mm
• Grip Area Diameter: 22.2mm
• Grip Area Length: 160mm
• Backsweep: 73°
• The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers.
• Bends forward 22° before bending backwards.
• Weight: 465 gramsPOA
