- Home /
- Components /
- Bottom Bracket /
- Wheels MFG Outer O-ring Pair
Wheels MFG Outer O-ring Pair
Description
Replacement o-rings for Wheels Mfg PressFit 30 (PF30) and PF30-OUT & BB30-OUT bottom brackets. This is the larger o-ring that sits on the larger section of each cup nearest the outer flange.
42mm x 44mm x 2mm
2 o-rings per bag
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BB86-FAT-SRAM7
PRESSFIT 41MM ABEC-3 FAT BIKE BB FOR 24/22MM (SRAM) CRANKS - BLACK
BB86 threaded BB for Fat Bike PF41.
Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
This is a fat bike bottom bracket! Your frame must have a 41mm inner diameter bottom bracket shell, with a width of 121mm or 132mm.
Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).
Bottom Bracket Shell I.D.: 41mm
Crank Spindle Type: SRAM / Truvativ GXP
Crank Spindle Diameter: 22/24mmStock Level:2Stock Level:2$199.50 (RRP)Add To Cart
-
24mm Outer Silicone Seal for Bottom Brackets
Outer seal for Wheels Mfg BB86/92, PF30-OUT, BB30-OUT, BB-ROAD, BB-MTN bottom brackets.
Note: Install seals with rubber-side facing away from bearing.
24mm ID for Drive-Side cup (Both Shimano and SRAM)
24mm ID for Non-Drive Side cup with 24mm crank spindle (Shimano, FSA, etc)
* Sold IndividuallyStock Level:2Stock Level:2Stock Level:Out of Stock$5.68 (RRP)$8.65 (RRP) -
Stock Code:CKBB-PBB083
Chris King bottom brackets utilize Fit Kits to ensure that cranks mate perfectly with our precision bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.
Fit Kit #3 (PBB083) for ThreadFit™ 30 with 30mm spindle cranksets.
For use with ThreadFit™ 30
68mm, 73mm BB shells.
Common Cranks: White Industries, SRAM, Race FaceStock Level:2Stock Level:2$45.00 (RRP)Add To Cart
-
Stock Code:CKBB-ADB2Stock Code:CKBB-ADS1Stock Code:CKBB-ADB1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 24x fits 68mm and 73mm shell widths with 24mm spindles.
It’s a silky smooth, long-lasting bottom bracket built around King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installationStock Level:2Stock Level:Out of StockStock Level:Out of StockStock Level:2Expected Date:06 June 2024$330.00 (RRP)$330.00 (RRP)$330.00 (RRP) -
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABY1Stock Code:CKBB-ABM2Stock Code:CKBB-ABZ1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ 30 fits 30mm spindle cranks in 68mm BB shells and SRAM DUB cranks.
Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationStock Level:In StockStock Level:Out of StockStock Level:Out of StockStock Level:In StockStock Level:1Stock Level:Out of StockStock Level:Out of StockExpected Date:06 June 2024$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)