Wheels MFG Repair Pack for 29mm BB
Description
Replacement spacer pack for Wheels Mfg 29mm spindle (SRAM DUB) bottom brackets.
Pack Includes:
2 - Silicone Dust Seal, 29mm ID, 42mm OD
2 - 0.5mm, 29mm ID Crank Spindle Spacer
2 - 1.0mm, 29mm ID Crank Spindle Spacer
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKBB-PBB023Stock Code:CKBB-PBB024
Fits:
• Press Fit 30 BB Shells
• 73mm Wide BB Shells
• 24mm>22mm Mountain Cranksets
• Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn$48.28 (RRP)$54.08 (RRP) -
Stock Code:WMBB-T47-BB-SRAM-AC
T47 threaded BB cups for T47 frames and 22/24mm diameter spindle cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
** Notes:
Wheels Mfg T47 internal bearing BB for use with 24/22mm spindle cranks may not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2) when used in BB shells with widths of 86.5mm and wider. If your Quarq spider has an ID less than 49.5mm, your crank may rub on the BB cup.
Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB.$241.50 (RRP)Add To Cart
-
Stock Code:WMBB-SP0001
46mm inside diameter cup spacers that fit between a bottom bracket cup and the frame. Machined from 6061 aluminum and anodized black. These spacers can be used for a few different scenarios:
When used with a Wheels Manufacturing GXP compatible bottom bracket, adding cup spacers between the non-drive side cup and the frame will move the chainrings on a GXP crank closer to the frame (reducing the chainline).
For Specialized road frames with the 61mm wide Carbon OSBB shell, you would place 3.5mm of spacers betwen each cup to effectively widen the BB shell to 68mm when used with non-Specialized cranks. One bag will properly space one 61mm wide Specialized OSBB shell to 68mm.
Bag Includes:
(2) - 2.5mm bottom bracket cup spacers (46mm ID)
(4) - 1.0mm bottom bracket cup spacers (46mm ID)$44.10 (RRP)Add To Cart
-
Stock Code:WMBB-386EVOBB-PRX
Thread together BB for 386EVO frames and M30 28/30mm diameter spindle Praxis - Compatible cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance.
Bottom Bracket/Frame Interface: BB386EVO, BB392EVO
Bottom Bracket Shell Width (mm): 86mm - 92mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 28/30mm
Over Bearing Width: 91.8mm in 86.5mm wide shell$241.50 (RRP)Add To Cart
-
Stock Code:BBBB-BB90/95-24-B3$37.97 (RRP)
Add To Cart
