Wheels MFG BB30/PF30 Universal Shim/Sram
Description
BB30/PF30 Universal Service Kit for Shimano and SRAM cranks
8 bikes worth of adapters in one kit!
Introducing our new system for adapting Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc.
(8) SHIMANO adapter (24mm ID, Shimano right or left; SRAM right only)
(4) SRAM-LEFT adapter (22mm ID, SRAM left only)
(4) SRAM-RIGHT adapter (24mm ID, Shimano right or left; SRAM right only)
(12) 0.7mm spacer – right (24mm ID, Shimano right or left; SRAM right only)
(4) 1.8mm spacer - right (24mm ID, Shimano right or left; SRAM right only)
(4) 2.5mm spacer – right (24mm ID, Shimano right or left; SRAM right only)
(8) 1.0mm spacer - left (30mm ID, SRAM)
(4) 2.5mm spacer - left (30mm ID, SRAM)
(4) 5mm spacer - left (30mm ID, SRAM)
(4) 10mm spacer - left (30mm ID, SRAM)
(8) Wave washer
(1) Removal tool for pulling adapters out of bearings
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-T47-OUT-SHIM-AC
T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.$223.00 (RRP) -
Stock Code:WMBB-BSABB-PRX
Run M30 28/30mm spindle Praxis compatible cranks in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer
1 - 28mm insert$173.00 (RRP)Add To Cart
-
Stock Code:CKBB-AGB1Stock Code:CKBB-AHB1
ThreadFit T47A 24 fits T47 BB-Right shells with 24mm spindles.
It’s a silky smooth, long-lasting bottom bracket built around King’s legendary angular-contact bearings.These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation*
- Fit Kit required for use**$349.00 (RRP)$349.00 (RRP) -
Stock Code:BBBB-46-73A-24-B5
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.$141.34 (RRP)Add To Cart
-
Stock Code:CKBB-AEB1Stock Code:CKBB-AES1Stock Code:CKBB-AET2Stock Code:CKBB-AEM2
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 30i will fit 68mm, 73mm, 83mm, 86mm, and 92mm shell widths with 30mm spindles.
All our bottom brackets come with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)
