Wheels MFG BB Threaded > 30mm CER Black
Description
Our solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 Ceramic Hybrid sealed bearings outboard of the BB shell. Fully serviceable.
Notes:
*For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm (BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide).
*Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH!
*Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-DRT-KIT
Wheels MFG Bottom Bracket/Drivetrain 120 piece spacer kit
•(20) 1.0mm FW Spacers •(10) 1.5mm FW Spacers •(10) 2.0mm FW Spacers •(10) NCS-4.5mm Cassette Spacers •(10) SHIM-.3MM BB30 Spacers •(10) SHIM-.5MM BB30 Spacers •(6) .7mm BB30 Shims •(6) 1.8mm BB30 Shims •(9) 2.5mm BB30 Shims •(4) BB30-CLIPs •(4) BB30/PF30 Wave Washers •(4) GXP Wave Washers •(4) .7mm Bottom Bracket Spacers •(4) 1.8mm Bottom Bracket Spacers •(9) 2.5mm Bottom Bracket Spacers$299.00 (RRP)Add To Cart
-
Stock Code:WMBB-T47-BB-SHIM-AC
T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.$223.00 (RRP)Add To Cart
-
Stock Code:WTBB-BSA-29-RSIL
Wolf Tooth BSA Bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. The ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag.
The bearings in Wolf Tooth Bottom Brackets feature a custom design. The balls and race are made from a hardened chrome bearing steel. This has a higher surface hardness than stainless, which improves the durability of bearing races and reduces spinning resistance and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets have superior performance in all conditions.
- Compatible with 29mm spindle cranksets
- Adjustable-width sleeve fits 68mm - 73mm BSA bottom bracket shells
- Best-in-class weather sealing protects bearings from water, mud, and debris
- Custom polymer spindle bushings eliminate creaking
- Installation and removal with standard 46-12 spline tool or BBS4612
- Replacement parts available
- Engineered, machined, and assembled at Wolf Tooth HQ in Minnesota, USA
- Lifetime warranty on the bearings
Bottom brackets ship with the following shell and spindle spacers:
- 2x 2.5mm shell spacers
- 2x 0.5mm, 2x 1mm, 3mm, 5mm, 7.5mm 29mm spindle spacers$259.00 (RRP)Add To Cart
-
Stock Code:CKBB-AEB1Stock Code:CKBB-AES1Stock Code:CKBB-AET2Stock Code:CKBB-AEM2
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 30i will fit 68mm, 73mm, 83mm, 86mm, and 92mm shell widths with 30mm spindles.
All our bottom brackets come with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:BBBB-EM-045-BOSH
This bushing is designed to be installed on the crankset axle of the Gen 4 Bosch motor.
It is strongly recommended replacing both bushings per motor for optimal performance.
When the friction bushings wear out, play may develop in the crankset axle, even after replacing the bearings included in the EM-026-BOSCH service kit (or with individual bearing replacements). As this part is not sold separately by Bosch, their official recommendation is to replace the entire motor unit when axle play occurs.
BlackBearing offer an alternative!$1,000.00 (RRP)
