Problem Solvers Double Barrel Lever left
Description
Problem Solvers Double Barrel Brake Lever, Left
· The Double Barrel lever pulls two long-pull brakes simultaneously
· Forged aluminum lever and cast aluminum bracket
· Three-finger design
Webshops and Bike shops
You may also be interested in...
-
Stock Code:YZBR70513Stock Code:YZBR70516Stock Code:YZBR70518Stock Code:YZBR70519Stock Code:YZBR70520Stock Code:YZBR70538$46.06 (RRP)$46.06 (RRP)$46.06 (RRP)$46.06 (RRP)$46.06 (RRP)Was:$49.60 (RRP)Now:$33.00 (RRP)Price:$33.00 (RRP)
-
Stock Code:PCBR-030BLACKStock Code:PCBR-030PEWTERStock Code:PCBR-030POLISHStock Code:PCBR-030PURPLEStock Code:PCBR-030SILVER
The Short Pull Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.
The narrower profile of the Touring Canti can be desirable if you’re riding with large panniers or if your current brakes don’t give you enough heel or calf clearance.
The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.
The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pads’ threaded posts.
Like all of Paul brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.$281.00 (RRP)$281.00 (RRP)$358.00 (RRP)$281.00 (RRP)$281.00 (RRP) -
Stock Code:PCBR-048BKLPStock Code:PCBR-048BKORLPStock Code:PCBR-048BKORSPStock Code:PCBR-048BKSPStock Code:PCBR-048FMBKCPStock Code:PCBR-048FMBKLPStock Code:PCBR-048FMBKORLPStock Code:PCBR-048FMBKORSPStock Code:PCBR-048FMBKSPStock Code:PCBR-048FMPOLPStock Code:PCBR-048FMPOSPStock Code:PCBR-048FMPUBKSPStock Code:PCBR-048FMPWBKSPStock Code:PCBR-048FMSICPStock Code:PCBR-048FMSIORSPStock Code:PCBR-048FMSISPStock Code:PCBR-048POLPStock Code:PCBR-048POSPStock Code:PCBR-048PUBKLPStock Code:PCBR-048PUBKSPStock Code:PCBR-048PWBKLPStock Code:PCBR-048PWBKSPStock Code:PCBR-048SILPStock Code:PCBR-048SIORLPStock Code:PCBR-048SIORSPStock Code:PCBR-048SISP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP) -
Stock Code:PCBR-065BLACKStock Code:PCBR-065PEWTERStock Code:PCBR-065POLISHStock Code:PCBR-065PURPLEStock Code:PCBR-065SILVERStock Code:PCBR-060PEWTERStock Code:PCBR-060POLISHStock Code:PCBR-060PURPLEStock Code:PCBR-060SILVER
The Compact Love Lever is a lightweight long-pull brake lever designed for comfortable two-finger operation.
Dual sealed-cartridge bearings provide maximum power and rigidity with zero slop, while the reach adjustment screw and oversized barrel adjuster allow you to easily dial in ergonomics.
Machined to the highest tolerances in Chico California.$405.00 (RRP)$405.00 (RRP)$507.00 (RRP)$405.00 (RRP)$405.00 (RRP)$405.00 (RRP)$507.00 (RRP)$405.00 (RRP)$405.00 (RRP) -
Stock Code:PCBR-073BLACKStock Code:PCBR-073SILVERStock Code:PCBR-070BLACKStock Code:PCBR-070PEWTERStock Code:PCBR-070POLISHStock Code:PCBR-070PURPLEStock Code:PCBR-070SILVER
The Canti Lever is a short pull brake lever for use with short pull brakes like cantilevers, center pull brakes, and side pull caliper brakes.
These levers are machined by Paul in Chico California to exacting specifications. The pivot features a dual sealed cartridge bearing for the smoothest, stiffest brake lever you will ever use.
Like all Paul components, these will be serviceable for a lifetime.
Recommend for use with Paul Racer, Neo-Retro, Touring Canti, Mini-Moto or Short Pull Klamper brakes, but they work well paired with any road caliper brake, cantilever brake, or other short pull brake. For a long pull brake lever, see the Love Lever Compact or Love Lever 2.5.$405.00 (RRP)$405.00 (RRP)$405.00 (RRP)$405.00 (RRP)$501.00 (RRP)$405.00 (RRP)$405.00 (RRP)
