Shockwave Fox Grip2 VVC 200h Kit
Description
Fox GRIP2 VVC Damper + Air Shaft 200h Toolkit (2021–2024)
Complete 200-hour rebuild kit for FOX forks using GRIP2 VVC dampers (36/38/40), covering both damper and air shaft service. Compatible with 2021–2024.
The VVC system is underdamped. If you need more support, consider moving to GRIPX2 or older GRIP2 non-VVC.
What's Included
- 3-in-1 GRIP Shaft Clamp
10mm Shaft Clamp (damper + air shaft)
GRIP Damper Body Clamp
8mm Clamp (for compression assembly, optional)
- Dust Wiper Tool V2
- Lower Leg Shaft Driver
- Plastic NA2 Bullet Tool for 10mm shafts
- Make sure you also have basic fork tools
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:15 December 2026Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:15 December 2026Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6450911
Compact size and low weight perfect for the tool box.
Two-sided, heat-treated tool steel head with replaceable plastic face on one side.
Dice Grip handle provides comfort and control while absorbing vibration.
The Hammer is a professional quality, efficient, mechanic's hammer perfect for the tool box or shop, and ready to tackle all your bicycle hammering needs. The Hammer features two-sided, heat treated tool steel head with a replaceable plastic face on one side. It features a compact 10.75" (275mm) length, 550g weight, and Dice Grip handle for comfort, control, and vibration absorption. The Hammer head diameter is 1 inch (25.4mm). The soft face tapers down to about 24mm.$55.00 (RRP)Add To Cart
-
Stock Code:ABTL-WSHBDDY-V1
The wash buddy clamps firmly into the rear drop out and has the ability to not only hold the chain but allow for full crank rotation and changing of cogs. This allows you plenty of room to clean and inspect your drive train while washing your bike or doing maintenance.
We tested these for over 2 years on the pro circuit to ensure you will have a durable tool for years to come. The stainless spindle will hold up to all of the solvents, water and grit that these tools get soaked in every time you use them. The Delrin pulley has great solvent resistance as well.
Our Delrin pulleys are available separately for use with thru axle bikes. Simply remove your wheel and slide the pulley over your factory thru axle for a nice secure solution. It's a great way to ship bikes as well.
Made in Bend Oregon.$114.00 (RRP)Add To Cart
