Pedros The Hammer
Description
Compact size and low weight perfect for the tool box.
Two-sided, heat-treated tool steel head with replaceable plastic face on one side.
Dice Grip handle provides comfort and control while absorbing vibration.
The Hammer is a professional quality, efficient, mechanic's hammer perfect for the tool box or shop, and ready to tackle all your bicycle hammering needs. The Hammer features two-sided, heat treated tool steel head with a replaceable plastic face on one side. It features a compact 10.75" (275mm) length, 550g weight, and Dice Grip handle for comfort, control, and vibration absorption. The Hammer head diameter is 1 inch (25.4mm). The soft face tapers down to about 24mm.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-BENCHTOPMAT1-1
You probably know that it's important to keep your workbench clean and organized, but it can be tough to do this when you're working on bikes. Parts and tools tend to scatter everywhere, and before you know it your bench is covered in grease, grime and you are missing half the parts.
Wheels Manufacturing has the perfect solution - the Ultimate Bike Benchtop Mat. This mat is designed specifically for keeping your workbench clean and organized while you work on your bike. The mat has an extra large work area, compartments for parts, tools, and components, so everything is within reach and easy to find. Plus, the mat has useful tools built in like metric and imperial rulers, ball bearing and sealed bearing gauges which make it easier to identify the parts you need when working on your bike. Don't go another day without this essential tool in your cycling arsenal.
- Built in gauge to easily and accurately identify outside and inside diameter of sealed bearings.
- Identifying ball bearing has never been easier with this ramped gauge that lets ball bearings roll into their identifying slot.
- Convenient metric and imperial ruler to quickly measure components
Benchtop mat details:
- Durable rubber-like PVC construction. Cleans easily and looks great on any bench
- Overall size 20”x12-¾” (Larger than other mats on the market)
- 12”x9.5” raised work area
- Imperial Ruler 0-12in
- Metric Ruler 0-48cm
- 4 sloped pockets
- 5 deep pockets
- Sealed bearing gauge
- Ball bearing gauge (1/8, 5/32, 3/16, 7/32, 1/4, 5/16)Expected Date:03 July 2026$129.00 (RRP) -
Stock Code:EVTL-EVTBG100
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$173.00 (RRP)Add To Cart
-
Stock Code:PDTL6450515G
Head rebuild kit for current Super Prestige floor pump.
Includes cap and gasket.$6.00 (RRP)Add To Cart
-
Stock Code:PDTL6451310
Innovative chain retention hook locks tool onto cassette, ensuring full chain wrap and eliminating slippage.
Tool geometry offers maximum effective leverage and compact 270mm length.
Compatible with all multi-gear cassettes including 13-Speed. Chain retention hook fits cogs up to 18 teeth.
Integrated fixed gear lockring wrench optimized for 41-42mm OD lockrings.
Pedro's new Pro Chain Whip takes inspiration from our beloved Vise Whip, applying many of the same functional principles to a more traditional chain whip design. The Pro Chain Whip design focuses on functionality, practicality, and safety. The innovative chain retention hook offers multiple benefits. First it keeps the chain secured to the tool during storage. Secondly, it improves user safety by locking the tool onto the cassette, ensuring full chain wrap and eliminating slippage. An added bonus of this feature is that the tool stays in place on its own. No more fumbling with your cassette lockring tool with one hand while trying to keep your chain whip in place. Being attached to the cassette, the Pro Chain Whip can also be used to slide the cassette off the hub. A nice option when dealing with grimy gears. Keeping traveling mechanics and portability in mind, the Pro Chain Whip geometry maximizes effective leverage while keeping the tool length to a compact 270mm and 225g weight. The integrated fixed gear lockring wrench, optimized for 41-42mm OD lockrings, adds versatility and is one less tool to carry. The Pro Chain Whip is compatible with all multi-gear cassettes including 13-speed and the chain retention hook fits cogs up to 18 teeth.$60.00 (RRP)
