Abbey T Way Base10 Piece
Description
The Abbey Bike Tools T way precision multi-tool is a great addition to the shop at home or work. This is built as a more robust multi use tool than our compact 4 way using the same durable stainless steel our Crombie heads use.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits from WERA that fit like a glove into the bolts on your modern bike. They won't strip out fasteners like the cheap offshore made tools that are so common in the bike world.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn stainless steel alloy and built a frame to hold the bits. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or assembling your bike for a fly away trip.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:BBTL-MTB32TOStock Code:BBTL-MTB34TOStock Code:BBTL-MTB35/36TOStock Code:BBTL-MTB38TOStock Code:BBTL-MTB40TO$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)
-
Stock Code:ABTLABT-SHCRANK
The Shimano Crank Tool (SCT for short) is specifically built to service the chainring lockring on Shimano single ring cranksets for 12 speed drivetrains. It features a large hex that can be used with a 1.5" or 38mm wrench or locked into a vise.
The clearance hole is kept to a minimum to keep the tool engaged on the low profile lockring, minimizing the chance of damaging the tool or parts.
Compatibility:
Chain ring lockrings on Shimano 12spd mountain crank sets.
XT and Ultegra bottom brackets
Made in Bend Oregon$76.00 (RRP)Add To Cart
-
Stock Code:SWTL-UDPH
Universal Dropper Post Holder | Hands-Free Install & Service
Installing or servicing a dropper post means working on the lever end at the bar while trying not to kink a cable or hose at the post. The Universal Dropper Post Holder locks the post in place so you can see what’s happening at both ends, no third hand required.
What Makes It Different
- All-size compatibility: Works with 27.2, 30.9, 31.6, and 34.9 mm posts. Adapters included; 30.9/31.6 share the same insert for fast swaps.
- TPU strap system: Wide, grippy strap conforms to any post diameter.
- Bleed-through access: Rear service port lets you bleed hydraulic posts (e.g., RockShox) without removing the holder.
- Cable/hose friendly: Elevates and stabilizes the post so housing won’t kink while you work the lever at the bar.
- Bench-ready design: Compact footprint with replaceable adapters, built for daily use in busy workshops.
How to Use
1. Choose the adapter for your post size and drop it into the base.
2. Set the post in the cradle, align the cable/hose path, and secure with the TPU strap.
3. Route and tension the cable (or connect the hose) while operating the lever at the handlebar.
4. For hydraulic posts, position the bleed port over the rear service hole and perform the bleed.
5. When you're done, unstrap it and pull out the tool.$68.00 (RRP)Add To Cart
-
Stock Code:PDTL6505027
Heavy-duty 10 oz. canvas sewn in the USA. 33” long by 24” wide for maximum coverage. Release buckle at the neck and waist for easy adjustment and quick on and off. Features a large pocket and two tool slots on the chest plus five large pockets and seven tool slots on the waist.
Expected Date:11 September 2026$88.00 (RRP)
