Abbey Bike Tools: Top Cap Socket 28mm
Description
Suspension service is a specialty within bicycle repair and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. Problem is you're still often left with a loose fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch.
We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. fully CNC'd machined with zero lead in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them caming off of the top cap under torque.
Offered in a 7 individual sizes and a 6 socket set for most modern suspension forks on the market.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:EVTL-EVTBG160
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valvesExpected Date:28 May 2026$173.00 (RRP) -
Stock Code:SWTL-DLDSD
Deluxe Fox/Marzocchi Fork Shaft Driver – Damper + Air Side
The upgraded dual-side driver for safely knocking out both damper and air shafts during lower-leg service. One tool replaces two separate Fox drivers.
What It Does:
- One end fits Fox/Marzocchi air shafts
- Other end uses a replaceable threaded tip for damper shafts
- Protects VVC rods / meter rods from impact damage
- Built for rubber mallet or wood block impact (no metal-on-metal)
- Same soft tips as our Basic Driver
Premium feel: larger, more stable body with dual-ended support.$62.50 (RRP)Add To Cart
-
Stock Code:RLTL-APC50-2
APC50-2 - Syringe Cap | Loobtoob Pro 50ml
Mobile storage that contains any unwanted mess, Fits 1 Loobtoob Pro 10ml with applicator when not in use.
Fits one Loobtoob Pro 50ml with applicator attached.
3d Printed In House - PETG Prusament.
Contains mess during transportation.
Protects applicator from contaminants and damage.
Fits over syringe and applicator.
DOES NOT FIT BASIC OR ARDES SYRINGES
SYRINGE AND CLIP NOT INCLUDED
NOTE: 3D Printed parts vary in resolution quality and may contain small surface imperfections. This is unavoidable but does not impact cap performance.$16.00 (RRP)
