Nitto M137AA 31.8x480mm Black
Description
The Nitto M137 Dirt Drop Handlebar looks similar to the current crop of Gravel bars but with more flare at the drops and with the smooth curves and nice finish you expect from Nitto.
- Reach: 78mm
- Drop: 128mm
- Clamp 31.8
- Heat Treated Aluminium
Made in Japan.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLHB-HB0419Stock Code:SLHB-HB1112
The Open bar is an upright bar but not an uptight bar. It’s equally suited to cruising, commuting, and even some singletrack, though it should be noted that this is not by any means a DH bar. We left it a bit flexy to take some of the harsh out of your ride. The angle makes it comfy for your wrists. The width enables loads of control. It’s got plenty of room for grips, shifters and brake levers. Knurled clamp area. 4130 CroMoly steel.
Clamp diameter: 25.4mm
Width: 666mm
Rise: 40mm
Sweep Angle: 53 degrees
Color: E.D. coated Black.POAPOA -
Stock Code:SMHB280144
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
- For city/MTB bars with 22.2mm OD.
- Aluminum constuction
- 50mm of extension per unit
- The resulting fit is not perfectly seamless, but good enough to where it should feel normal after grips are installed.
- DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
- ID not sized to accept reverse levers or bar end shifters.
- Requires a 6mm hex key (2 inches long) to install$112.00 (RRP)Add To Cart
-
Stock Code:RSHBRS-60-21Stock Code:RSHBRS-60-26Stock Code:RSHBRS-60-22Stock Code:RSHBRS-60-27Stock Code:RSHBRS-60-23Stock Code:RSHBRS-60-28Stock Code:RSHBRS-60-24Stock Code:RSHBRS-60-29Stock Code:RSHBRS-60-25Stock Code:RSHBRS-60-30
The gravel bike handlebar that has everything but the kitchen sink.
If you are looking for comfort, control, and convenience the Kitchen Sink Gravel Bike Handlebar is for you. With widths from 41cm up to 53cm, these new low flare gravel handlebars can aid stability and control but at the same time provide really comfortable hand positions.
KEY Handlebar Features:
• 20mm of rise means less pressure on the hands and a broad range of fit options to accommodate a variety of gravel riding conditions.
• 7° degrees of sweep means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops during your most epic gravel ride.
• Low Flare (10° degrees) and a compact drop are perfect for road and gravel riders who prefer a more traditional road shaped bar.
Why 10 degrees?
Because it's the right balance between classic dropbar shaping and the ergonomic + comfort advantages of flare. A small amount of flare on performance road bike bars is quickly becoming a very popular option for this very reason.
Loop or Non-Loop?
Choose between two gravel bar styles: LOOP and a more traditional NON-LOOP. The Loop version provides an alternative riding position, a great place to attach gear, and the perfect spot for our custom storage solution: the Kitchen Sink Gravel Handlebar Bag. The bag was designed specifically to fit in the loop and allow easy (single hand) access to all your essentials for bikepacking and long gravel rides. In addition, we created a Computer Mount that attaches to the top of the bag to give you a secure and ideally located spot for your Garmin or Wahoo bike computer.
To get even more comfort and performance out of your Kitchen Sink Gravel Bar, add the ergonomic Cruise Control Grip System. The Top Grips provide an incredibly comfortable position at the tops by expanding the bar and giving you a wide area to rest your hands. And the Drop Grips give you an extra comfortable position while in the drops through an ergonomic style grip that helps spread load over your hands so you can stay in your tuck all day.
Top it all off with some of our Really Long Bar Tape which is specifically designed to be long enough to wrap even the widest gravel handlebar. Oh and it's super comfortable with just the right amount of grip.$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP) -
Stock Code:NTHB-B809AA-318-73-BK
The NITTO B809AA-SSB is an aluminium mountain bike handlebar.
- 730mm wide
- 31.8mm bar clamp
- Backsweep of 8° and a rise of 32 mm.
Made in Japan$164.00 (RRP) -
Stock Code:NTHB-M137AA-318-52-BK
The Nitto M137 Dirt Drop Handlebar looks similar to the current crop of Gravel bars but with more flare at the drops and with the smooth curves and nice finish you expect from Nitto.
- Reach: 78mm
- Drop: 128mm
- Clamp 31.8
- Heat Treated Aluminium
Made in Japan.$158.00 (RRP)Add To Cart
