Pedros Compact Crank Remover
Description
Compact Crank Remover
- Made from heat-treated tool steel.
- New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles.
- Precision tolerances provide perfect fit and floating tip design ensures easy crank removal.
- Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench or pedal wrenches.
Pedro's Compact Crank Remover provides the professional quality, precision fit tool required to properly remove press fit square taper or splined cranks.
The Crank Remover is made from heat-treated tool steel for the ultimate in strength and lasting performance and features a floating tip design for easy crank removal.
New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles. Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench, Equalizer Pedal Wrench, or 15mm Pedal Wrench.
Backed by Pedro's lifetime warranty.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-TL9002
E-bike Hub Drive Cassette Socket Bafang
E-bikes are here to stay! Designed to save the mechanic time and money, our new e-bike sockets are machined to match manufacturer specifications.
The E-bike Hub Drive Cassette Socket is used installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring.
- 8620 Steel
- Zinc finish$64.00 (RRP)Add To Cart
-
Stock Code:SWTL-QDFD
The Quick Drop Fork Dummy lets you remove a fork from a bike in seconds without losing any headset or cockpit hardware. Bearings stay seated, spacers stay in order, and the stem remains aligned while the fork is out. Built for fast bikeshop jobs.
HOW IT WORKS
The tip of the Top Part matches the inner diameter of a standard steerer tube. It is slightly tapered and features a strong integrated neodymium magnet.
Remove your top cap, insert the Quick Drop into the steerer from above, and push the fork downward. As the fork slides down, the tool stays into the steer tube being held by the tight tolerances and the magnet.
You can guide the fork down or lightly pull it while the tool follows smoothly into the headset and frame, holding bearings, spacers, and stem in position.
The lower bearing may stay on the fork during removal. If using the Top + Bottom Kit, place that bearing onto the bottom piece, reinsert both parts into the frame, align them, then rotate 180° to lock the system together.
The magnetic tip also makes reinstallation easier. When guiding the steerer back into position, the magnet helps catch and align the tool instantly, making engagement quick and controlled.
The holding force is strong enough to keep everything composed, even allowing the bike to be turned upside down temporarily if needed during service or short-term storage.$44.90 (RRP)Add To Cart
-
Stock Code:ABTL-SLPRS-DRVR35MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
-
Stock Code:ABTL-TCSOCKET32MM
Suspension service is a specialty within bicycle repair and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. Problem is you're still often left with a loose fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch.
We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. fully CNC'd machined with zero lead in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them caming off of the top cap under torque.
Offered in a 7 individual sizes and a 6 socket set for most modern suspension forks on the market.$53.00 (RRP)Add To Cart
