Radlabs Flat Needle Applicator
Description
A Stainless Steel 14gauge 12mm long needle pressed FLAT at the tip. Produces a ribbon or bead of material when dispensed.
For use on bearings, freehub bodies, shifters, and lubricating small mechanisms.
- Luer-Lock Compatible
- Stainless Steel Needle
- Crushproof Polypropylene Connector
- 14 gauge Opening for Precise Control
- Guaranteed For Life!
WARNING:
NEEDLES ARE SHARP!
USE CAUTION WHEN USING ANY SHARP OBJECTS
STORE COVERED IN A SAFE AND VISIBLE LOCATION.
NOT FOR FOOD OR MEDICAL USE!
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:PDTL6450658
Versatile professional event tool kit designed around a highly customizable platform ready to get the job done.
Heavy-duty 56 x 35 x 23cm wheeled case is lockable, dustproof (IP6X), waterproof (IP7X), and MIL-spec certified. Features heavy-duty latch closures, 3 ergonomic handles (2 carry, 1 retracting), and automatic pressure release valve, all backed by a lifetime warranty.
Contents include 59 professional quality tools and extensive selection of 1/4" hex bits, a lid-mounted upper panel with a tappable 325-hole array, a multi-position lower case divider panel with 24 additional tappable holes, 50 tool clips in five sizes (14 pre-installed), two heavy duty parts trays with hinged lids, and a Burrito Tool Roll II.
The original professional event tool kit, Pedro's Master Tool Kit has been trusted by mechanics around the world since 2004 and has a track record matched by no other. Building upon this solid foundation, the new 4.0 edition features updates from top to bottom. The kit includes 59 professional tools including many new and updated items, and an extensive selection of 1/4" hex bits, all focused on expanding kit capabilities. The new case is inspired by the latest trends from the pits, rethinking what a travel tool case can be, with thoughtful consideration to allow the flexibility mechanics want and need to customize their personal setups. The new heavy-duty case adds 100+ cubic inches (1640cc) of internal space while the wheeled design with retracting handle and two carry handles adds ease and convenience. The lid-mounted upper panel offers a blank slate ready for your custom tool layout. Use the included tool clips to dial in your setup or add your own personalized touches. The lower case divider panel offers multiple options with two primary positions and three sub-positions for fine tuning fit. It also features an array of holes. Add clips or customizations to secure items to the divider panel in the lower case. The custom parts trays, with removable hinged lids, offer secure storage for small parts and are designed to nest internally on the upper edge of the lower case. When it's time to get to work, the trays mount externally on the case and feature tool slots perfect for staging in-use tools. Finally, the workhorse Burrito Tool Roll II's unique x-frame system quickly converts it from a flexible roll into a rigid tool pallet designed to hang on the front of the 4.0 case. The Burrito Tool Roll II features a large 23x16in (60x40cm) surface with numerous pockets in assorted sizes and types including a large mesh zipper pocket to securely hold small parts or tools. Pack it full, store inside your case rolled up, then unroll, hang on your case, and get to work. Kit weight is 32.5lb (14.7kg).$2,400.00 (RRP)Add To Cart
-
Stock Code:PDTL6462113
Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
Superior material and optimized heat treatment outlast the competition.$33.00 (RRP)Add To Cart
-
Stock Code:RLTL-LTPK10M
This Is Kit Includes:
1. LTP10 - Loobtoob Pro 10ml Syringe
1. BS814- Medium Brush-it Applicator
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP10 - Loobtoob Pro 10ml Syringe
Crushproof fully featured Pro syringe with a 10ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
0.50ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
BS814- Medium Brush-it Applicator
Nylon brush applicator with a medium 8x3mm tip, for general projects.
Material dispenses into the brush for clean, convenient one handed application.
For use on fasteners, medium sized areas, clamping surfaces.
Luer-Lock Compatible
Seamless Stainless Steel
Durable Nylon Bristles
Crushproof Polypropylene Connector
14 gauge Opening for Precise Control
Guaranteed for life!$24.00 (RRP) -
Stock Code:SWTL-UCS-SM
Ultimate Clamp Set Small | All Shaft Sizes from 8mm to 5/8"
The most complete clamp set for small shafts. Covers every size you could ever encounter, from 8 mm up to 5/8". Works on coil shocks, damper shafts, and most air shocks.
This is the best bang for your buck, one kit that does it all for small-diameter suspension work.
Important Warning:
- Never clamp directly on a damper body or shaft without the proper tool.
- Always clean with isopropyl alcohol and wrap in 1 layer of paper towel to reduce clamping force.
Compatibility Notes:
- Compatible with nearly all coil shocks and damper shafts
- Works on most inline air shocks (Fox Float X, DPX2, RockShox Super Deluxe, etc.)$77.00 (RRP)Add To Cart
