Radlabs Medium Brush-it Applicator

You may also be interested in...

• 

  ×

  Stock Code:

  WMTL-BP0001

  Wheels MFG Bearing Press Pro Kit

  Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.
  
  The Bearing Press Pro Kit installs 14 bearing sizes including today's most common bottom bracket and thru axle bearings. The kit also includes linkage offsets for full suspension bearing installation and 7 speed spacers for faster installs. All parts are laser etched for easy identification.
  
  PRESS-1 includes:
  
  (2) T-Handles with 3/8" Acme threaded rod
  (2) 15mm x 25mm Speed Spacer
  15mm x 35mm Speed Spacer
  17mm x 25mm Speed Spacer
  17mm x 35mm Speed Spacer
  20mm x 25mm Speed Spacer
  20mm x 35mm Speed Spacer
  (2) 30mm Speed Spacer
  (2) 20mm frame linkage standoffs
  (2) 30mm frame linkage standoffs
  
  Open Bore Drifts for the following bearing sizes:
  
  (2) 6802
  (2) 6803
  (2) 6804
  (2) 6901
  (2) 6902
  (2) 6903
  (2) 15x26
  (2) 27.7x37
  
  Over Axle Drifts for the following bearing sizes:
  
  (2) 6802x20mm
  (2) 6803x20mm
  (2) 6804x20mm
  (2) 6901x40mm
  (2) 6902x7mm
  (2) 6903x7mm

  Stock Level:

  1

  Stock Level:

  1

  $445.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  PDTL6000054

  Pedros Tape Measure

  Tape Measure
  3 Meter/9.8 Foot Metric/English Tape Measure with Instant Lock Tape
  Compact size perfect for toolbox or pocket.
  Ergonomic, durable design with instant-lock tape for easy use.
  Features centimeter and inch scales for measurements up to 3 meters/9.8 feet.
  Measurements are an essential part of bicycle mechanics needed for everything from bike fitting, to component positioning, and much more. The Pedro's Tape Measure is perfect to tackle any bike measure task featuring a compact design and small details that make a difference. Our instant locking design is the opposite of most tape measures on the market and is truly handy when trying to juggle a bike, tools, and make a measurement at the same time. The small size is just right for the toolbox and won't take up valuable space needed for other tools. Backed by Pedro's lifetime warranty.

  Stock Level:

  In Stock

  Stock Level:

  In Stock

  $18.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  ABTLFrm-Std-BrgRmvl-St

  Abbey Bearing Removal Set

  When cartridge bearings became common in bicycles in the mid 90's they didn't come with tools to service them. It feels like for at least a decade we were installing bearings with a random socket that was close to the right size and removing them with a hammer and a punch. Over the years tools have gotten better and now we have another big step forward in bearing removal.
  
  The removers use an expanding cone that goes behind the bearing and allows you to remove it while tightening the nut. This pulls the bearing into the black cup smoothly with minimal effort. No hammers, no punches, most importantly no damage to your parts. Be sure to watch our shop video to learn how to use this tool properly.
  
  Compatible with bearing Inside Diameters (ID) from 12 to 20 millimeters.
  Compatible with Bearing Outside Diameters from 24 to 37 millimeters.
  Commonly used for hubs and suspension linkage bearings.
  
  
  These removers started life as a Noble Tools item and when they closed down in 2023 we acquired the design and putting them back into production. The design is unchanged and parts are backwards compatible with tools made by Noble.
  
  
  Designed by Noble Tools, London England. Made in Bend Oregon, USA

  Stock Level:

  2

  Stock Level:

  2

  $540.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  ABTLABT4W345T25

  Abbey 4-Way Multi-Tool - (3/4/5/T25)

  The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.
  
  Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag.
  
  The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night.
  
  Custom bit option: Hex Bits: 3, 4, 5, Torx 25

  Stock Level:

  In Stock

  Stock Level:

  In Stock

  $82.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  PDTL6451210

  Pedros Universal Crank Remover/Handle

  Universal Crank Remover with Handle
  
  - Made from heat-treated tool steel.
  - Capable of all functions needed to remove square taper and splined cranks.
  - Includes: Puller with integrated ergonomic handle, inserts for splined and for square taper cranks, and 8mm hex for crank bolt removal.
  - Precision tolerances provide perfect fit and floating tip design ensures easy crank removal.
  
  Pedro's Universal Crank Remover provides the tools required to properly remove press fit square taper and splined cranks and unlike similar items offered by the competition, we include everything you need in one convenient package
  
  The Universal Crank Remover fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles and splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a “self extracting” system. The 8mm hex wrench is perfect for crank bolts and can also be used in pedals with 8mm broach.
  
  Pair with a standard 15mm pedal wrench for easy pedal removal.
  
  Backed by Pedro's lifetime warranty.

  Stock Level:

  In Stock

  Stock Level:

  In Stock

  $42.00 (RRP)

  Add To Cart

  Qty: