Radlabs Syringe Cap Loobtoob Pro 50ml
Description
APC50-2 - Syringe Cap | Loobtoob Pro 50ml
Mobile storage that contains any unwanted mess, Fits 1 Loobtoob Pro 10ml with applicator when not in use.
Fits one Loobtoob Pro 50ml with applicator attached.
3d Printed In House - PETG Prusament.
Contains mess during transportation.
Protects applicator from contaminants and damage.
Fits over syringe and applicator.
DOES NOT FIT BASIC OR ARDES SYRINGES
SYRINGE AND CLIP NOT INCLUDED
NOTE: 3D Printed parts vary in resolution quality and may contain small surface imperfections. This is unavoidable but does not impact cap performance.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-JAR-TIE$87.00 (RRP)
Add To Cart
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-CL-SOCKET
The Wheels MFG Centerlock Socket is designed to create a tight grip on a standard 44mm Centerlock Rotor Lockring to avoid slipping while torquing lockrings onto Centerlock Hubs. Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal The socket can also be used with 3/8" ACME threaded press rods and adjustable press stop to prevent slipping. (Not Included). 6061 Aluminum Color: Red
Expected Date:03 July 2026$59.00 (RRP) -
Stock Code:EVTL-EVT3IN1GAUGE$68.00 (RRP)
Add To Cart
-
Stock Code:ABTL-PREHAG
If you've been working on your bike for a while, you are well acquainted with the simple derailleur hanger and it's importance to your shift quality. The HAG has been a cornerstone tool in the Abbey catalog for a long time and it's accuracy is unparalleled in the industry. But what if you just want to check hanger alignment in a quick easy manner without removing your rear derailleur? Enter the 3D printed preHAG!
This simple tool is meant to quickly see if the derailleur cage is parallel to the cogs. It simply presses and flexes onto the largest cog and hangs down to give you a reference plane to judge if your bike is square with the world. This isn't meant to replace the accuracy of a HAG, just add an additional step that doesn't require any disassembly of the bike for those pre ride once overs.
Made in Bend OR
Protected under US Patent # 11,852,471.$36.00 (RRP)Add To Cart
