Soma Handlebar Extender V1 50mm Silver
Description
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
• For city/MTB bars with 22.2mm OD.
• Aluminum constuction
• 50mm of extension per unit
• Comes in black or silver
• DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
• ID not sized to accept reverse levers or bar end shifters.
• Requires a 6mm hex key (2 inches long) to install
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMHB278021Stock Code:SMHB278022
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425gExpected Date:20 May 2026Expected Date:20 May 2026$214.00 (RRP)$214.00 (RRP) -
Stock Code:SMHB280123Stock Code:SMHB280124Stock Code:SMHB280125
We have added adjustable extensions to our Hwy One compact drop road handle bar. Designed mainly as additional hand position on long road or gravel riding. The clamps and extensions are not fixed, so you can rotate the extensions into different positions.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm
- 31.8mm center
- Single grooveWas:$292.00 (RRP)Now:$187.00 (RRP)Price:$187.00 (RRP)Was:$292.00 (RRP)Now:$187.00 (RRP)Price:$187.00 (RRP)Was:$292.00 (RRP)Now:$187.00 (RRP)Price:$187.00 (RRP) -
Stock Code:SMHB278035
The Soma Gullwing was designed to be the most natural way to adapt a road bike to flat bars while still retaining your integrated road shift/brake levers.
The bar has a 30mm rise and 25ª backsweep. Harder to see in photos is the 7° drop at the grips which suits a semi-aggressive ride position and puts your wrists in a better angle to operate the levers. The curve for the backsweep also creates the ideal amount of brake lever travel for road levers.
The brake lever hoods can be used as a secondary place to rest your hands and to get more aero. Hood position feels similar to a 38cm road bar, which is fine, since this is not the primary hand position.
Grip section is 22.2mm OD, so you can either run MTB grips or bar tape.
Straight section near the clamp is 110mm wide, which gives some room for accessories or possibly aero bars.
Designed in Japan by Tokyo San Esu.
• Width: 620mm
• Center: 31.8mm OD
• Material: 6061-T6 Aluminum
• Rise: 30mm (with 7° down slope at grips)
• Backsweep: 25°
• Grip OD: 22.2mm
• Lever mounting area OD: 23.8mm
• Weight: 290g
*** Not feasible to use with Campagnolo Ergo levers, L-Twoo, or other models where one of the shifters is on the inboard side of the lever.Expected Date:20 May 2026$233.00 (RRP) -
Stock Code:RSHBRS-64-09Stock Code:RSHBRS-64-10Stock Code:RSHBRS-64-01Stock Code:RSHBRS-64-04Stock Code:RSHBRS-64-02Stock Code:RSHBRS-64-05Stock Code:RSHBRS-64-03Stock Code:RSHBRS-64-06Stock Code:RSHBRS-64-07Stock Code:RSHBRS-64-08
The Top Shelf Handlebar raises your position by 50 or 70mm to give you an ultra-comfortable upright riding position and easy reach to the drops. It features the same backsweep, flare and compact drop as our best-selling Kitchen Sink Handlebars, so you can stay comfortable and in control no matter the terrain.
The patent-pending design features a unique double-bar construction, which allows for easy, secure mounting of bags and accessories. Configure the perfect set-up for anything from an afternoon gravel adventure to an epic multi-day bikepacking trip.
KEY Handlebar Features:
RISE - 50 or 70mm (2 or 2.75in) of rise creates a more upright and comfortable riding position without the use of a highly angled stem or excessive headset spacers. This allows riders to achieve a more upright, relaxed fit while maintaining traditional drop-bar bike geometry.
CONTROL - Take advantage of the drops. The higher positioning of the drops provides a comfortable and secure hand position, giving you control to navigate rough terrain and steep descents. This keeps your body weight centered, while reducing neck and back strain.
BACKSWEEP - 7° degrees of backsweep orients the bar where your hands want to be. Whether you're on the flats, the hoods, or the drops, you’re getting an ergonomic position for your most epic gravel rides.
FLARE - 25° degrees of flare and a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use on your longest gravel ride or your next bikepacking trip.
FULL RANGE OF WIDTHS - 41, 44, 47, 50, and 53cm widths.
STORAGE - the unique double-bar construction provides room for all of your bar-mounted accessories. Mount handlebar bags (like our custom-fitted Top-Shelf Handlebar Bag which is now available) securely, without flopping around like they do on a standard handlebar.
Perfect for road, gravel, bikepacking, and commuting.
Why are Your Riser Handlebars Flared?
Our handlebars are designed to seek a balance between the traditional wide flat bars which offer stability and control over rough terrain and the comfort and speed of road bike drop bar position without sacrificing control. The Top Shelf Handlebars are flared in the drops to give the rider a stable and more controllable riding position that is essential for gravel biking terrain. This combination of comfort and control allows you to ride longer, further and faster and is especially well-suited to long distance multi-day, week or even months long bikepacking rides.$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)$255.00 (RRP)
