Surly Terminal Bar Black 31.8 40mm Rise
Description
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain.
Back Sweep (deg): 34 deg
Bar Clamp Diameter (mm): 31.8 mm
Weight: 400 g
Lever Compatability: Mountain 22.2
Material: Aluminum
Rise: 40 mm
Width: 735 mm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:TNHB-HB-E118
The Thomson aluminum trail bar is 750mm wide with 20mm of rise, 8° of backsweep and 5° of upsweep. The clamping area is 50mm allowing a different bend profile for a more compliant ride. The Trail bar gives you a light aluminum all-around bar for your Mountain Bike.
$199.00 (RRP) -
Stock Code:TNHB-HB-E130Stock Code:TNHB-HB-E131
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare, 130mm REACH.
Ready for your next adventure, regardless of the road you choose.$220.00 (RRP)$220.00 (RRP) -
Stock Code:SAHB-HB0349Stock Code:SAHB-HB0351Stock Code:SAHB-HB0352Stock Code:SAHB-HB0353
Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12-degree flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops.
- Lightweight and strong 7050-T76 series alloy construction with polished finish
- Drop/Reach: 115/68mm
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- 12 deg flare and drop anglesPOAPOAPOAPOA -
Stock Code:SMHB278022
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425g$190.00 (RRP) -
Stock Code:SMHB280142
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
- For city/MTB bars with 22.2mm OD.
- Aluminum constuction
- 50mm of extension per unit
- The resulting fit is not perfectly seamless, but good enough to where it should feel normal after grips are installed.
- DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
- ID not sized to accept reverse levers or bar end shifters.
- Requires a 6mm hex key (2 inches long) to install$45.00 (RRP)
