Shockwave Universal Steerer Tube Dummy
Description
Pulling your fork should not turn your bike into a pile of headset parts. The Universal Steerer Tube Dummy replaces your fork’s steerer so your headset stack stays exactly where it belongs: bearings seated, spacers aligned, stem in place. No loose hardware, no “where did that spacer go”, no caliper hanging by the hose.
Compatibility
- Universal fit: Designed for standard 1-1/8" (28.6 mm) steerers, works with both straight and tapered forks.
- Not compatible: oversized “Overdrive” steerers found on some older Giant bikes.
- Standard length: 220 mm (covers the huge majority of bikes).
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-JAR-TIE$87.00 (RRP)
Add To Cart
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punchExpected Date:07 May 2026Expected Date:07 May 2026$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-TL9002
E-bike Hub Drive Cassette Socket Bafang
E-bikes are here to stay! Designed to save the mechanic time and money, our new e-bike sockets are machined to match manufacturer specifications.
The E-bike Hub Drive Cassette Socket is used installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring.
- 8620 Steel
- Zinc finishExpected Date:07 May 2026$64.00 (RRP) -
Stock Code:PDTL6460608
Use the Crowfoot Flare Wrench on any 1/4" drive torque wrench to ensure accurate torque on delicate disc brake compression fittings. A perfect add-on for our Demi Torque Wrench.
1/4" square drive and 7 and 8mm flare style box wrenches
Precision laser cut and heat treated tool steel for strength and lasting performance.$14.00 (RRP)Add To Cart
-
Stock Code:ABTLABTPRESSHV2
This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amateur should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. Then we added a pair of 5" machined handles for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in.
Kit includes a complete handled press head, 12" press shaft, quick nut and the following drifts;
PF30/1.125" headset
24mm bottom bracket drifts, for shimano compatible bottom brackets
22mm bottom bracket drift, single drift for non drive GXP bottom bracket
28.9mm bottom bracket drift, for SRAM DUB
6806 drift for BB30 bottom brackets
1.5" headset drift
centering cone
Additional drifts are on the bearing page and longer press shafts along with service parts are available on the parts page.
We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.
Made in Bend Oregon.$635.00 (RRP)Add To Cart
