Shockwave Universal Dropper Post Holder
Description
Universal Dropper Post Holder | Hands-Free Install & Service
Installing or servicing a dropper post means working on the lever end at the bar while trying not to kink a cable or hose at the post. The Universal Dropper Post Holder locks the post in place so you can see what’s happening at both ends, no third hand required.
What Makes It Different
- All-size compatibility: Works with 27.2, 30.9, 31.6, and 34.9 mm posts. Adapters included; 30.9/31.6 share the same insert for fast swaps.
- TPU strap system: Wide, grippy strap conforms to any post diameter.
- Bleed-through access: Rear service port lets you bleed hydraulic posts (e.g., RockShox) without removing the holder.
- Cable/hose friendly: Elevates and stabilizes the post so housing won’t kink while you work the lever at the bar.
- Bench-ready design: Compact footprint with replaceable adapters, built for daily use in busy workshops.
How to Use
1. Choose the adapter for your post size and drop it into the base.
2. Set the post in the cradle, align the cable/hose path, and secure with the TPU strap.
3. Route and tension the cable (or connect the hose) while operating the lever at the handlebar.
4. For hydraulic posts, position the bleed port over the rear service hole and perform the bleed.
5. When you're done, unstrap it and pull out the tool.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Stock Level:In StockStock Level:2Stock Level:2Stock Level:1Stock Level:1Stock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:In StockStock Level:Out of StockStock Level:2Stock Level:2Stock Level:Out of StockStock Level:2Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:In StockStock Level:2Expected Date:18 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:BBTL-TO-TOOLHEADSET
This stainless steel tool is used to measure the angle of the headset’s bearings
There are 4 measure points: 36° and 45° inside and 36° and 45° outside.Stock Level:Out Of StockStock Level:Out of StockExpected Date:04 December 2026$43.74 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Stock Level:In StockStock Level:2Stock Level:2Stock Level:1Stock Level:1Stock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:In StockStock Level:Out of StockStock Level:2Stock Level:2Stock Level:Out of StockStock Level:2Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:In StockStock Level:2Expected Date:18 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:ABTL-TWAY-45T25
The Abbey Bike Tools T way precision multi-tool is a great addition to the shop at home or work. This is built as a more robust multi use tool than our compact 4 way using the same durable stainless steel our Crombie heads use.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits from WERA that fit like a glove into the bolts on your modern bike. They won't strip out fasteners like the cheap offshore made tools that are so common in the bike world.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn stainless steel alloy and built a frame to hold the bits. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or assembling your bike for a fly away trip.
Configuration: Hex Bits 4mm, 5mm, Torx 25 Fixed.Stock Level:In StockStock Level:In Stock$114.00 (RRP)Add To Cart
-
Stock Code:PDTL6460601
Pedro's Large Sizes Hex Bit Set is designed to work with Pedro's torque wrenches offering ideal and economical coverage of less common large hex wrench sizes.
Set includes:
Hex: 10, 11,12, and 15mm (65mm Length Bit)
Hex: 14 and 16mm (21mm Length Bit)Stock Level:1Stock Level:1$75.00 (RRP)Add To Cart