Shockwave Quick DropLite
Description
The QuickDrop Lite is built for maximum workshop efficiency. It keeps your headset stack perfectly organized during fork removal and makes reinstallation even faster thanks to its integrated top handle. Simple, fast, and made for mechanics who do this all day.
HOW IT WORKS
The lower section of the Quick Drop Lite matches the inner diameter of a standard steerer tube with tight, workshop-ready tolerances.
Remove your top cap, insert the tool from above, and guide the fork downward. The Lite stays engaged inside the steerer, holding spacers, stem, and headset bearings aligned while the fork slides out.
The large integrated handle gives you direct control during both removal and reinstallation. You can guide the fork smoothly with one hand while keeping everything centered and stable.
During reinstall, simply guide the steerer back up while lightly holding the handle. The alignment stays straight, spacers remain stacked, and components slide back into place without juggling.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-TOOL-BUSH
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots.
Includes retaining tool, top cap and all three eyelet "slammers".
Fits eyelet sizes - 10mm, 12mm and 1/2".
Machined aluminum$68.00 (RRP)Add To Cart
-
Stock Code:WTTLHAT-QR-ADPTStock Code:WTTLHAT-QR-KITStock Code:WTTLHAT-TA-KITStock Code:WTTLHAT-TAQR-KIT
Quick Release Adapter - add on part to allow the Thru Axle Kit to be used on quick release bikes
$48.41 (RRP)$136.99 (RRP)$234.84 (RRP)$284.28 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:07 May 2026Expected Date:07 May 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6451250
Bicycle Cable and Housing Cutter
Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance.
Ergonomic, cushioned grip, and high leverage design for comfort and ease of use.
Quickly and cleanly cuts brake and derailleur cables, housing, and other wires.
Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.$55.00 (RRP)Add To Cart
-
Stock Code:ABTLABTDUTOOL
This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum. These drifts can also be used with our Micro Bearing Press.
Made in Bend Oregon.$63.00 (RRP)
