RedShift Handlebar Shim 25.4mm
Description
This bicycle handlebar shim is designed to work with 25.4mm drop bar handlebars to take them to 31.8mm in order for you to affix your favorite bike accessories - it includes 2 pieces to make 1 complete shim.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:PSHB-SM1071Stock Code:PSHB-SM1070Stock Code:PSHB-SM5701Stock Code:PSHB-SM5319$19.00 (RRP)POAPOAPOAPOA
-
Stock Code:TNHB-HB-E117
750mm wide and offers 15mm of rise together with a 5° backsweep and 8° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for All Mountain/Freeride, light enough for racing.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 215g
*NOT SUITABLE FOR BAR ENDS.Expected Date:26 October 2026$320.00 (RRP) -
Stock Code:WSHB-HB0363
Whisky’s all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar’s flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories.
- Compound flare — 12 degrees at the hoods and 20 degrees through the drops
- Drop/Reach: 100mm/68mm
- 31.8 clamp diameter
- Di2 compatible with bar end junction for 1x drivetrain setups$525.00 (RRP)POA -
Stock Code:RSHBRS-62-01
Really wide handlebars need really long tape. Stop struggling with standard length tape and treat yourself to some Really Long Tape.
- Really long - wrap the widest bars
- Did we mention just how long it is? There's enough tape to cover the widest Kitchen Sink Handlebar, with Cruise Control Grips installed, as well as the endurance loop.
- Anti-vibration padding
- Durable compound maintains grip even when wet
- 315 cm length (standard tape is 180-200 cm)
- 3mm thick with specially formulated advanced PU outer$79.99 (RRP)Add To Cart
-
Stock Code:SMHB280143
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
• For city/MTB bars with 22.2mm OD.
• Aluminum constuction
• 50mm of extension per unit
• Comes in black or silver
• DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
• ID not sized to accept reverse levers or bar end shifters.
• Requires a 6mm hex key (2 inches long) to install$40.00 (RRP)
