EVT Gauge only for 2 in 1
Description
Replacement 0-160 psi gauge for the 2-in-1 Inflator. Highly accurate.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-ST0010Stock Code:WMTL-ST0009Stock Code:WMTL-ST0008
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters:
8mm
9mm
10mm
12.7mm
15mm
15.9mm
16.7mm$137.00 (RRP)$137.00 (RRP)$137.00 (RRP) -
Stock Code:PDTL6463036
Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal.
New extra long 27cm hex key and second ball-end deliver leverage and speed.
Specifically designed for quick and easy installation and removal of pedals and cranks.
Ergonomic dual-density screw driver handle.
Designed to stand up to the harsh conditions of professional use.
Backed by Pedro's lifetime warranty.$28.00 (RRP)Add To Cart
-
Stock Code:RLTL-BS514
Nylon brush applicator with a small 5x2mm tip, for the most precise projects. Material dispenses into the brush for clean, convenient one handed application.
For use on freehub bodies, small fasteners, and small mechanisms.
- Luer-Lock Compatible
- Seamless Stainless Steel
- Durable Nylon Bristles
- Crushproof Polypropylene Connector
- 14 gauge Opening for Precise Control
- Guaranteed for life!$12.00 (RRP) -
Stock Code:ABTL-SLPRS-DRVR40MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
