Abbey 1/8 Mid Plate for DECADE
Description
1/8" mid plate, needed to use the Decade chain tool with wide 1/8" track and single speed chains.
Made in Bend Oregon.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-TL9000
Shimano Hollowtech II Cranksets compression bolt
Precision machined anodized aluminum designed to allow for easy installation, removal or adjustments of the Shimano Hollowtech II Crankset compression bolt.$56.00 (RRP) -
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individually$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:ABTLABTPRESSHV2
This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amateur should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. Then we added a pair of 5" machined handles for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in.
Kit includes a complete handled press head, 12" press shaft, quick nut and the following drifts;
PF30/1.125" headset
24mm bottom bracket drifts, for shimano compatible bottom brackets
22mm bottom bracket drift, single drift for non drive GXP bottom bracket
28.9mm bottom bracket drift, for SRAM DUB
6806 drift for BB30 bottom brackets
1.5" headset drift
centering cone
Additional drifts are on the bearing page and longer press shafts along with service parts are available on the parts page.
We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.
Made in Bend Oregon.$635.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTBG15
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$173.00 (RRP)Add To Cart
-
Stock Code:PDTL6451201
Compact Crank Remover
- Made from heat-treated tool steel.
- New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles.
- Precision tolerances provide perfect fit and floating tip design ensures easy crank removal.
- Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench or pedal wrenches.
Pedro's Compact Crank Remover provides the professional quality, precision fit tool required to properly remove press fit square taper or splined cranks.
The Crank Remover is made from heat-treated tool steel for the ultimate in strength and lasting performance and features a floating tip design for easy crank removal.
New design includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined bottom bracket spindles. Works with any 15mm wrench like Pedro's Ratcheting Combo Wrench, Equalizer Pedal Wrench, or 15mm Pedal Wrench.
Backed by Pedro's lifetime warranty.$30.00 (RRP)Add To Cart
