EVT 2 in 1 Inflator
Description
The 2-in-1 Inflator is the most accurate bicycle tire inflation instrument on the market, and is the first ever made to always give precise pressure readings on Presta valves. This is a professional level, industrial grade tool that will last a lifetime and then some, it's completely rebuildable with parts available direct from EVT. Hook this up to your favorite air compressor and you won't be dissapointed!
The 2-in-1 is designed, assembled, and pressure tested in the USA at our Portland, Oregon factory using parts and materials sourced from the PNW region.
Easily switch between both Schrader and Presta valves - design gives highly accurate readings on both.
Proprietary '4 Barrel High Flow Presta Valve Adapters' are machined from solid stainless steel to fit each individual Schrader chuck.
Custom-molded polyurethane seals engage easier and last much longer than rubber.
Stainless steel body with aluminum cap resists repeated impacts better than case-hardened inflators.
Lever engagement is more positive than before with improved design of the locking channel.
This inflator also serves as a basic blow gun with the presta adapter in place (Non O.S.H.A. approved-use at own risk). Features a McDaniels gauge. Gauge and Presta Adaptor not warranted against failure due to dropping, but we do offer replacement parts.
EVT also offers an elegant and effective holster to prevent impacts.
You won't want to use anything else after experiencing the ease and speed of the 2-in-1.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:03 July 2026Expected Date:03 July 2026Expected Date:03 July 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-ST0006
An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes.
Fits 12mm and 1/2" bushings.
Machined aluminum$195.00 (RRP)Add To Cart
-
Stock Code:PDTL6462115
Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
Superior material and optimized heat treatment outlast the competition.$33.00 (RRP)Add To Cart
-
Stock Code:ABTLABTMIPRESS
The Micro Modular Bearing Press is designed with smaller hub and suspension bearings in mind. With drifts to service bearings with an inside diameter of 13 millimeters and smaller this is a great choice for those smaller more delicate bearings.
The press head features a true thrust bearing, this unique feature keeps the press action super smooth and cuts down on the effort required. The thrust bearing isolates all of the torque from the compression which allows your bearing to go in square. It works so well that you don't need even need handles.
The press head has a 6mm hex in the top of the press head so you can use it as a bail out gear in case you find something that is fitting excessively tight.
Drifts included to precisely fit bearing sizes:
608
608_9
609
619
688
6000
6001
6701
6800
6801
6802
6900
6901
6902
Made in Bend Oregon.$635.00 (RRP)Add To Cart
-
Stock Code:ABTL-STUSTICK
At bike races I normally try to make the rounds, see what people are up to, show them new tools and get inspiration for new products. Stu Thorne (cyclocrossworld.com) put a common rotor truing tool in my hand and asked me to make it out of aluminum. Apparently traveling with the cyclocrossworld.com? team for a decade he'd learned to travel light.
A few samples later we've got a 44 gram rotor truing tool called the Stu Stick. So whether you want to slip it into your hydration pack for that enduro mountain bike ride or travel the world working with one of the staples of cross racing it's up to the task.
You can even use it to crack open a beer after you're done with the days fun.
Made in Bend Oregon.$45.00 (RRP)Add To Cart
